Engineering Design Show

The 19th and 20th October 2016 ABSSAC Stand D10 ABSSAC will be displaying, at the Engineering Design Show, its range of cold rolled formed miniature ball screws. The uniqueness of these linear devices is that they utilise precision ground ball nuts, which then operate with precision cold rolled formed screws. The ball screw and nut combination delivers a lead accuracy close to a precision ground screw but with considerable cost saving. The standard working tolerances can achieve a cumulative lead error C7 (+- 0.05/300mm) or C10 (+-0.21/300mm) as standard. A high mechanical efficiency of over 90%, means the required torque is reduced to only 1/3 of what is required to drive a conventional lead screw and plastic nut design. ABSSAC ball screws are manufactured, assembled and inspected using the same discipline for processing super-precision ball screws in a temperature controlled environment. Using selected materials that are ideal for rolling contact, the frictional resistance is minimised, resulting in less wear and greater performance than other ball screw designs. Add to the mix, the capability of supplying the ball screws machined to print so that they can be placed immediately into the application adds another reason to use ABSSAC as a linear supplier. By having the ball screw assemblies delivered complete this immediately reduces the scrap rate for the customer. The machining capability enables ABSSAC to deliver the screws machined to the customers’ individual requirements, whilst a full range of precision linear slides, thrust and radial bearings, further compliment the ball screw ranges. With over 30 years’ experience and knowledgeable staff always available, ABSSAC looks forward to meeting old and new customers at the 5th Engineering design exhibition in October. Abssac Limited T: 01386 421005 E:sales@abssac.co.uk W: www.abssac.co.uk

For more information on Engineering Design Show talk to Abssac Ltd