Pressure Washer Suction Barrel Tank 200 Litre Water Butt

Recycled 205 litre barrel, but all of the other fittings and filters are new The pressure washer and hoses are NOT included and are there to demonstrate the use of the barrels only.This an ideal solution if you need a break tank, or you have a poor water supply, or let your pressure washer have its full water flow, or you need to run two machines from one water supply etc. There are many reasons why a suction tank is needed. There are two designs. TYPE B. (this listing) Water supply in the side and controlled with a float valve, and the outlet is also fitted to the side, as shown in the photos. A filter is fitted to the end of the internal piping. More than one outlet can be fitted to order if required. The picture listed shows male barbs on both inlet and outlet as this wash a special request from a customer. Normally they will be supplied with a hozelock male connector on the inlet and a 15mm hose barb fitting on the outlet as standard. If you require the outlet to be a 19mm hose barb or a hozelock type coupling on the outlet please send a message when purchasing, otherwise a 15mm barb will be supplied.Also included now is a 3 meter length of 1/2" (15mm) or 3/4" (19mm) hose and 2 jubilee clips which can fit between the tank and your machine. Please state which size you require when ordering. If you do not state you will get 15mm barb and hose. Type ASide inlet and top outlet. There is a water float valve fitted to the side and a hole in the top to put your suction hose through. Suction hoses and filters are available at an extra cost see my other listing or send an email for prices. The inlet coupling will be fitted with a brass Hozelock male connector as standard, other fittings are available on request.

For more information on Pressure Washer Suction Barrel Tank 200 Litre Water Butt talk to Ace Cleaning Equipment