Turret Slitter 410 (Exhibition and Display usage only )

Ex-demo – Turret slitting machine available ex-works, Special discounted price, interested parties should contact Barry Taylor (sales@ace-machine.co.uk) or alternatively feedback through the contact form this web site, state: special price turret. Machine specification: Unwind type: Shaft-less pick-up from floor Maximum roll diameter: 1000mm Maximum roll width: 1400mm Minimum roll width: 600mm Maximum roll weight: 1000Kg Core size: 76mm + 152mm Core holding: Dual size mechanical compression chucks Brake: AC servo motor with 3:1 ratio gearbox with EtherCat network Tension range: 5- 40Kg Tension control: Automatic pneumatic dancer arm Cam roller: First roller in the material web path fitted with eccentric cams that have +/- 3mm of movement Splice table: Table mounted above the parent roll; the splice table will have 2 x independently controlled pneumatic clamps Guiding system: BST ball-screw actuator guiding system with ultrasonic edge sensor Guider travel: +/- 75mm End of roll detector: Ultrasonic sensor monitors the parent roll diameter at all times Under floor web path: Leading to Rewind section. All rollers up to and including this section are cork covered. Rewind section: Duplex dual turret centre wind with support system for turret operation Infeed to main drive: Specially cut rubber spreader roller Main drive: Dual 150mm diameter hard chrome roller with pneumatically controlled rubber nip. Main drive motor: AC Servo motor with EtherCat network Maximum machine speed: 500 mtr /min Infeed to slitting section: Specially cut rubber spreader roller Slitting type: Razor slitting in air Razor holders: Individual spring loaded clip on type Minimum slit width: 25mm Knife holders supplied: 10 off included Rewind section: Maximum rewind diameter: 450mm Rewind shafts supplied: 4 x 75mm differential slip shafts with ball locking chucks Rewind motors: 2 x AC Servo motors with EtherCat network & tail wind up motor Lay-on system: 2 x full wide lay-on assemblies with 50- shore rubber contact rollers. Each system fitted with an automatic cut off

For more information on Turret Slitter 410 (Exhibition and Display usage only ) talk to Advanced Converting Equipment Ltd