Fuel Polishing System – Diesel Filtration

The Agriepure range of Fuel Polishing Systems from Agriemach offers superior efficiency of filtration and reliability. We offer 10 standard Fuel Polishing Systems which accommodate a selection of different flow rates, inlet and outlet sizes and of course choice of power options. We also offer a bespoke build service, as we believe it is important to accommodate our customer’s needs for diversity and preference. Our Standard mobile fuel polishers, Systems 1 to 4, offer flow rates from 25 litres per minute, to 80 litres per minute, while filtering particulates down to as little as 2 micron in size and separating free water. We decided not to “reinvent the wheel” and make our own filters; so we use only original Parker Racor filters to provide our customers with reliable high filtration efficiency. These systems are available in 12v, 24v, 110v, 230v and ATEX Pneumatic driven pump choices. Our DEP-280 High Flow Fuel Polishing System is used for bulk fuel tanks for either polishing the fuel or transferring the fuel, occasionally from old tank to new. This system offers filtration of particulates down to 5 micron, water separation and a flow rate of 280 litres per minute. The system is built with a primer pump to fill the system, before switching over to the main pump which provides the high power necessary to move fuel at such a high flow. The clear bowl filter assemblies offer instant inspection of the fuel as it is being filtered, and offers a drain valve at the bottom of each filter chamber for draining the separated water. Our line of fuel polishing cabinets are second to none, boasting remote automation through an intelligent control panel, accepting signals from multiple switches and sensors in order to monitor and maintain itself. We offer remote signalling such as a link to the building management system, email or telephone call out should the system experience an event or unscheduled shut down. There are a whole host of options available which include a selection of flow rates, filtration efficiencies down to 1 micron including water separation; diesel bug killer magnet packs and even fuel heating systems for those very cold applications where the fuel begins crystallising. We also offer ATEX certified systems for use in hazardous areas, petrochemical, offshore etc – as well as a unique demulsification system for separating water that has mixed with the fuel. Away from diesel filtration we also offer a range of hydraulic oil polishing and filtration systems which come in a selection of sizes

For more information on Fuel Polishing System – Diesel Filtration talk to Agriemach Ltd