A52. SR-130 REAR WINDOW DEFOGGER KIT - PMITW90130

PRODUCT DESCRIPTION: Repairs broken grid lines and connector tabs on the rear window defogger. This epoxy contains silver enabling it to conduct electricity. WORKS BEST ON: Use to repair broken gride lines and connector tabs on the rear window defogger of automobiles, trucks and RV?s. Can also be use to repair electrial connections on toys and models. PRODUCT FEATURES: Color: Silver Water Resistant Working Time 20 – 25 Minutes Full Bond: 24 Hours at room temperature NOTE: Repairs may be made at temperatures below 10ºF but will require longer time to cure Temperature:: Works best betwee75ºF to 80ºF (Temperatures below 10ºF) slows the curing time) Storage: Store in a cool, dry environment. SURFACE PREPARATION: Locate each break or nick in the grid and clean with enclosed alcohol wipe. Remove all dirt, dust, finger prints and etc. REMOVAL METHODS: Before epoxy is allowed to dry, remove excess immediately with damp cloth. Can also use mineral spirits or isopropyl alcohol. After cure: Fabric: Before epoxy cures, immediately flush fabric with warm water or wipe with a damp cloth. Once epoxy is cured, it is not possible to remove it from the fabric. HELPFUL HINTS: Read the directions completely before starting the repair. As stated in direction #3, use ordinary scotch tape, place a strip of tape on both sides of the break leaving a small channel between (this is where you will apply the epoxy). Once the repair is complete, remove tape (before epoxy cures). Equal portions of the hardener and resin must be thoroughly mixed together in order for this product to cure properly. The most common problem with a two-part epoxy product is not mixing it thoroughly; it will not cure and will remain tacky. Once the product is thoroughly mixed, it can be applied to the repair area(s). Please note, during the mixing process, be sure to push the sides and bottom of the pouch into the mixture so that you are mixing all of the epoxy resin and hardener together. Have the repair area ready before mixing the epoxy hardener and resin together, so that you can begin repair as soon as the pouch contents are thoroughly mix. Removable tape is good for putting on an area that you don?t want any adhesive/epoxy to get on. Before the epoxy cures, remove the tape.

For more information on A52. SR-130 REAR WINDOW DEFOGGER KIT - PMITW90130 talk to Agriemach Ltd