A53. RADIATOR/FUEL TANK EPOXY 1oz - PMITW16709

PRODUCT DESCRIPTION: A two-part epoxy putty stick that repairs leaks, holes and cracks in metal. Plugs small holes, seams or cracks on any gas tank instantly, without welding or removal of tank. Works in the presence of gasoline and water. The material is mixed together by kneading the two parts together until they are a uniform color. WORKS BEST ON: Metal gas tanks and gas cans. Repairs cracks and breaks in tanks and drums, plumbing and pipe repair. PRODUCT FEATURES: Tensile Strength: 920 psi Non-Flammable Color: Black Can be Handled In: 2 hours Full Bond: 12-24 hours Temperature Range: Dry 250ºF; Wet 125ºF Chemical Solvent Resistance: Gasoline, oil, kerosene, water. Storage: Store in a cool, dry environment in unopened container. SURFACE PREPARATION: Slightly roughen repair area. Clean surface by solvent-wiping to remove grease, oil, dirt or other contaminants and allow to dry. REMOVAL METHODS: Before Cure: Scrape off excess with a putty knife before epoxy hardens. After Cure: Metal: File or sand cured material. HELPFUL HINTS: Ideal application temperature is 55ºF to 90ºF. In cold conditions, heat repair area to 100-110ºF immediately prior to applying epoxy to dry off any moisture, contamination or solvents, as well as to assist epoxy in achieving maximum adhesion properties. Heat is generated while the epoxy mixture cures; the more epoxy and hardener that is mixed together, the more heat that is generated causing the epoxy mixture to cure faster. Only mix the amount of epoxy and hardener together that can be used within the working time. For a smooth appearance of the cured compound, hand-rub with water or damp cloth prior to epoxy hardening. May be used on a plastic tank. Make sure tank is clean and the surface is roughened up (use sand paper).

For more information on A53. RADIATOR/FUEL TANK EPOXY 1oz - PMITW16709 talk to Agriemach Ltd