A59. SR-237 PLASTIC LENS REPAIR KIT

PRODUCT DESCRIPTION: Professional lens repair kit restores broken and damaged plastic headlight lenses, tail lights, brake lights and turn signals. WORKS BEST ON: Headlights, Tail lights, Brake lights, Turn signals - Professional Lens Repair System restores broken and damaged plastic Headlight lenses, tail lights, brake light and turn signal lenses to their original look and color. Easy-to-use epoxy system and pattern sheets can repair flat or curved damage up to 3” x 4” in size. PRODUCT FEATURES: Tensile Strength: 1,500 psi Color: Red, Amber or Clear Water Resistant Working Time: 4 – 5 Minutes Set Time: 8 – 10 Minutes Can be Handled In: 20 Minutes Full Bond: 4 Hours Temperature Range: 40ºF to 200ºF (Temperatures below 40ºF slows the curing time) Chemical Solvent Resistance: gasoline, diesel and kerosene. Epoxies are generally not recommended for long term exposure to chemicals and solvents, Storage: Store in a cool, dry environment. SURFACE PREPARATION: Protect work area from accidental spills. Slightly roughen repair area. Clean surface by solvent-wiping to remove grease, oil, dirt or other contaminants. REMOVAL METHODS: (test inconspicuous area of item to be sure chemicals do not harm surface) Before epoxy is allowed to dry, remove excess immediately with damp cloth. Can also use mineral spirits or isopropyl alcohol. After cure: Metal/Ceramic/Glass: Soak in hot water, if possible. Heat in excess of 350ºF, this will weaken the bond. Solvents that can be used: isopropyl alcohol, acetone, methylene chloride or other solvent. Fabric: Before epoxy cures, immediately flush fabric with warm water or wipe with a damp cloth. Once epoxy is cured, it is not possible to remove it from the fabric. Wood: Sand the cured material from the wood. HELPFUL HINTS: Read all of the instructions prior to starting repair. Have everything ready to go prior to mixing the epoxy pouch so that once mixed you can make the repair quickly. The epoxy will start to harden within 5 minutes once the epoxy and hardener are thoroughly mixed. Heat is generated while the epoxy mixture cures; this is a natural reaction while the epoxy and hardener are curing. Equal portions of the hardener and resin must be thoroughly mixed together in order for this product to cure properly. The most common problem with a two-part epoxy product is not mixing it thoroughly; it will not cure and will remain tacky. Once the product is thoroughly mixed, it can be applied to the repair area(s). Please note, during the mixing process, be sure to push the sides and bottom of the pouch into the mixture so that you are mixing all of the epoxy resin and hardener together.

For more information on A59. SR-237 PLASTIC LENS REPAIR KIT talk to Agriemach Ltd