Pressure Relief Valves PRV System Type V/VM/VMC/VMP/VF

PRV System Type V/VM/VMC/VMP/VF Pressure Relief Valves The AKO Pressure Relief Valve is fitted onto a bypass line of a pump. The Pressure Relief Valve is then charged with air and set closed at the pressure it is required to relieve at. If the associated pump becomes clogged or blocked, causing the line pressure to exceed the pressure at which the valve is set closed at, it will open allowing the product to bypass the pump and equalise the pressure until the blockage is cleared. The Pressure Relief Valve will then reset itself in its 'closed' position to the original set pressure. Pressure Relief for pumps, water, liquid, sewage/sludge and food industry Proved reliability in the industry for over 10 years with 1000 plus applications in the UK Clear and true bore - no blockages No mechanical parts to get clogged or blocked Easy and low cost maintenance Single body casting When the valve is set (using footpump) to the required pressure, the air supply is no longer needed - perfect for remote areas The Valve resets itself when a blockage is cleared No need to strip down the valve after it has relieved No need to reset after pump starts ups or pressure surges All Valves fully tested with unique tracking number - 100% leak tight seal Full technical backup and valve maintenance in house or on site

For more information on Pressure Relief Valves PRV System Type V/VM/VMC/VMP/VF talk to AKO UK Ltd