Mooring Systems for Crane and Excavator Barges

Mooring Systems Over the years, Atlas have been renowned for the hire and sale of 4 / 6 and 8 point mooring systems for crane and excavator barges, offshore supply and survey vessels. A mooring system describes a set of components:- winches, power packs, wires / ropes, fairleads, anchors and buoys used to confine a barge or vessel to a specific location and to hold it on station within defined limits. This location can be in open water or along side a harbour quay or jetty. The mooring system could range from a simple single rope or wire holding a small boat to a buoy, through to an 8 winch system using large wires and anchors to keep a barge or tanker in position. Atlas experience Our experience enables us to recommend the most appropriate solution based on technical, operations, economic and time considerations. This could be a rental or sale solution. Design considerations are as follows – project description, type and size of vessel, water depth, seabed conditions, type of anchors, wind forces, current loads, wave effect and size of anchor spread etc. By working closely with the customer Atlas will find the correct solution for your requirements.

For more information on Mooring Systems for Crane and Excavator Barges talk to Atlas Winch & Hoist Services