BA765 "Henry" Connection Tester

This is a high specification tester that will measure many cable parameters. It measures cable resistance very accurately using the Kelvin 4-wire method. It also tests for shorts between pins at a low voltage. The next test is to measure insulation between connections at a higher voltage. This is carried out at up to 1500 Volts DC with resistances of 1 to 100 Meg ohms. There are many optional tests that can be carried out including HiPot tests and AC tests at up to 2000V. It is also possible to add and LCR tester and check that capacitors and resistors have been correctly fitted. The modular design of this cable harness connection test system provides flexibility so that it will meet both your present requirements and it can expand for your future needs. The Windows* software is user friendly, using the standard interface that you are familiar with. The cable harnesses and connection test results are displayed clearly on the screen, the table shows resistance values (Inductance and Capacitance value if this option is fitted), Pass or Fail results for shorts and continuity (Hipot DC / AC if option is fitted). This allows quick rework and feedback to production of the nature and position of the faults. All the results are stored in a standard Access database format allowing production and quality control to record test results and to analyse them for AQL.

For more information on BA765 "Henry" Connection Tester talk to Banair Electronic Engineers