Sign In
Air Diffusers
supply and exhaust
ventilation systems
continuous slot and linear louvre diffusers
introduction The LCS series diffuser has been developed
to provide a simple and economical form of
continuous slot air distribution system and is
suitable for variable air volume schemes or fan
coil applications.
The air direction blades are readily adjustable
from the diffuser face and have been designed
to minimise discharge air turbulence, resulting
in low pressure loss and low noise generation
characteristics.
The LCS system is completely modular, offering single section lengths up to
2m, in maximum widths of 6 slot.
The frame and intermediate sections incorporate alignment plate slots to
ensure section joins. Preformed corner sections can also be supplied to suit
building contours, thereby eliminating site trimming.
The standard finish is satin anodised frame and T sections with matt black
blades. A wide range of paint finishes are also available in BS or RAL
colours.
The following designations should be used when specifying the required
finish:
A = Satin anodised frame with black blades.
B = Specified frame colour with black blades
Control options include diffuser mounted opposed blade dampers (OB)
or spigot mounted flap dampers (FDQ Quadrant operated or FDC Cord
operated).
The yoke strap fixing method is offered as standard, providing ease of
installation when used with Brooke Air plenums.
The installation procedure is similar to that for Flowline diffusers, details of
which are given on page 11.
A full range of plenums are available to suit a variety of installation conditions.
Flanged and Recessed
Linear diffusers
CONTINUOUS SLOT DIFFUSER
control
sizes
finish
options
type
fixings
LCS
2
Yoke Strap Fixing
Plenum
Alignment
Plate Slots
Blade Access Tab
Standard Flanged unit shown
Radius to be specified.
Radius to be specified either
convex or concave.
Linear diffusers
CONTINUOUS SLOT DIFFUSER
design features
TYPE - LCS
CURVED CEILING - CILL (CC)
CURVED SIDE WALL (CSW)
curved options
R
3
LCS1 LCS2 LCS3 LCS4 LCS5 LCS6
NUMBER OF SLOTS
N o/a NECK 54 101 148 195 242 289
P I/S PLENUM 68 115 162 209 256 303
F o/a FLANGE 80 127 174 221 268 315
Ceiling opening = P + 3
P I/S
N
N - 5
30 20
F O/A
27 27
Section Length
1.5 82
type end option finish
LCS3 / ENDS / A / 1500 / 6
length quantity
Examples :
When ordering linear sections, state the number of slots required, the
section length and the finish designation code.
Section length L
(Maximum Single Section Length 2m)
O/A Length with End Caps = L + 54
Maximum Blade
Length 600
When ordering corner sections, state the number of
slots required, the inside lengths A and B, the angle
and the finish designation code.
Note: dimensions A and B should be based on the
reflected ceiling plan.
Corners are normally supplied as non active sections.
type angle finish
LCS3 / 90o / A / 300 x 300 / 6
length (A x B) quantity
(Minimum 300)
A
(Minimum 300)
B
4.2
(Flanged)
Note: inside Plenum length add 14mm when using end caps.
dimensions
DIMENSIONS AND ORDERING DESIGNATIONS
ordering
designations
Linear diffusers
TYPE - LCS
4
Ceiling opening = F + 6
P I/S
F - 5
16.75
20
F O/A
27
19 x 19 angle
82
15
R/LCS1 R/LCS2 R/LCS3 R/LCS4 R/LCS5 R/LCS6
NUMBER OF SLOTS
F o/a NECK 54 101 148 195 242 289
P I/S PLENUM 68 115 162 209 256 303
(Recessed)
Note: inside Plenum length add 14mm when using end caps.
DIMENSIONS
Linear diffusers
dimensions
TYPE - R/LCS
R
5
AIR FLOW RATE (l/s/m)
20 40 60 80 100 120 140 160 180 200
LCS1
LCS2
THROW MIN
(m) MAX
PROJECTION (m)
Ps (Pa)
NR LEVEL
THROW MIN
(m) MAX
PROJECTION (m)
Ps (Pa)
NR LEVEL
AIR FLOW RATE (l/s/m)
100 125 150 175 200 225 250 275 300 325
LCS3
LCS4
TH
For more information on Continuos Slot / Linear Diffusers talk to Brooke Air Sales
Enquire Now
List your company on FindTheNeedle.