AudioJoG Pro 8

AudioJoG Pro 8 Features: There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over. Connectors: 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2.5mm Jack, stereo or mono 2,4 & 8 Pole Speakon MINI DIN 4 Pole DIN 3, 5 (180o) & 8 Pole RCA Phono BNC50/75W / HD SDI RJ45, Ethercon USB A & B Mini & Micro USB 4mm Red & Black Memory: There are 6 LED's indicating the state of the MEMORY. If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button. MEMORY works in single and double ended test modes.. INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found. Test Modes: Double ended - both ends of the cable under test are plugged into the AudioJoG Pro 8 Single ended - one end of the cable under test is plugged into AudioJoG Pro 8 the other into another AudioJoG Pro 8 or any other compatible AudioJoG tester. Specification,Double {Single} ended: Continuityand Short Circuits, less than 255K {75K} ohms OpenCircuits (end to end and between connected pins), greater than 255K {75K} ohms Lessthan 2 {5} second test time Sturdy Stainless Steel METAL BOX construction L203mm W 150mm D 50mm Uses 9v PP3 battery (notsupplied) Click to download Manual Click to download Leaflet

For more information on AudioJoG Pro 8 talk to CableJog Ltd