AudioJoG Pro 8 mobile

AudioJoG Pro 8 mobile Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: PowerCON in and out 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2.5mm Jack, stereo or mono 2 & 4 Pole Speakon MINI DIN 4 Pole DIN 3, 5 (180o) Pole RCA Phono BNC50/75W / HD SDI RJ45, Ethercon USB A & B Mini & Micro USB 4mmRed & Black Memory: There are 6 LED's indicating the state of the MEMORY. If the MEMORY LED is on, then AudioJoG Pro 8 mobile automaticallyscans all the connections and compares against information held with just onepress of the test button. MEMORY works in singleand double ended test modes.. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found. Test Modes: Double ended - both ends of the cable under test areplugged into the AudioJoG Pro 8 mobile Single ended - one end of the cable under test isplugged into AudioJoG Pro 8 mobile the other into another AudioJoG Pro 8 mobileor any other compatible AudioJoG tester. Specification,Double {Single} ended: Continuityand Short Circuits, less than 255K {75K} ohms OpenCircuits (end to end and between connected pins), greater than 255K {75K} ohms Lessthan 2 {5} second test time SturdyMETAL BOX construction L203mm W 150mm D 50mm Uses 9v PP3 battery (notsupplied) Click to download Manual Click to download Leaflet

For more information on AudioJoG Pro 8 mobile talk to CableJog Ltd