IR Over HDMI Kit

This IR over HDMI kit allows you to control any device by remote control and utilising your existing HDMI cable, even when out of sight. No additional cable is necessary. Simply disconnect your HDMI cable and place one of the IRinjectors supplied at each end of the HDMI cable. Connect the infra red receiver to the injector at the TV end and connect the infra red transmitter to the other end to control a distant set-top box, DVDplayer, Blu-Ray player etc while watching the TV.This IR over HDMI kit works with any standard remote control using the typical 30kHz to 50kHz frequency. It works by utilising the often unused CEC channel which is built into your HDMI cable. The CEC channel is not frequently used but it allows your TV to communicate directly with peripherals of the same brand, for example Anynet+ by Samsung, Bravia Link by Sony, Viera Link by Panasonic and Aquos Link by Sharp - this product switches off this system. It cannot be used alongside any of the CEC systems listed above or similar ones used by other manufacturers. If you are currently using a CECsystem to allow your TVto control your Blu-Ray player, DVDplayer or other sources, then this kit is probably not required. This kit works with HDMI cables of up to 25m and works with systems including HDMIsplitters, switches or HDMI extenders.Please note that this product will NOTwork with the Virgin Tivo or Humax receivers. Includes HDMI IRinjectors1 IR Receiver and cable1 IR Transmitter and cable Specifications Carrier frequency 30kHz - 50kHzInjector input - one full size HDMIsocket, one 3.5mm IRinputInjector output - one full size HDMIplug, one 3.5mm IR outputInput/Output ResolutionsSize each injector 38mm x 22mm x 15mm12 Month Warranty

For more information on IR Over HDMI Kit talk to Clear Vision Systems