Modular Cleanroom Design

Free-Standing or Portable Enclosures for all configurationsConnect 2 Cleanrooms Ltd manufactures free standing mild steel or stainless steel structures. They are designed to be independent from the surrounding room and therefore ere equally suited within an existing cleanroom, manufacturing area or warehouse. Our clear wall panelling choices include flexible PVC strips, PETg, PC hard wall panels. Our rooms come fully equipped with the best in filtration and airflow control. Filtration is supplied by 99.99% HEPA with a totally variable speed control allowing air changes to be adjusted to either prolong filter life or to increase air change rates within the room.Freedom Of DesignThe modular cleanroom design provides an economical and versatile solution to clean manufacturing or operating requirements in many fields and our systems are used throughout the UK and further afield. Our basic designs are as follows;Master Unit: 2.6m x 2.6m x 2.1 high. Ideal room that can be supplied complete with an internal change room. Options include braked castors and lights. Can be supplied from ISO Class 5 to Class 8 Slave Unit: 1.3 m x 2.6m x 2.1 high. Ideal room that can be supplied on its own or can be added to the Master Unit as a change area. Can be supplied from ISO Class 5 to Class 8 Rapid Room: 1.8m x 1.8m x 2.1m high. This room is available from stock and can be installed in just 30 minutes. It is an ideal first cleanroom or it can be ideal for storage for emergencies and contingencies. Can be supplied from ISO Class 7 to Class 8 Bespoke: This design allows total freedom with spans up to 7m and bay widths up to 3m. This allows rooms of larger sizes without any internal legs for obstruction. Currently we have built rooms in excess of 200 square meters. Softwall CurtainsThe Softwall system has total versatility allowing production to stride from outside the cleanroom to the inside. This principle can allow essential maintenance or material handing to be carried out without upsetting the integrity of the cleanroom. This technique can be especially useful in industries such as injection moulding, extrusion and thermoforming.Softwall panels are fabricated of 300mm wide clear PVC. Panels are over lapped by 50%. Softwall panels and mounts attach to the support frame by means of a easy hang mounting system. Other mounting systems are available.This technique can be especially useful in industries such as plastics moulding and printing coating lines. Softwall panel lengthAll softwall cleanrooms require some gap between the curtain and the floor to allow air to escape. If this gap is too narrow to accommodate the flow of air generated by the ceiling filter fans, then curtains and strips will billow outward. If it is too big, the cleanroom will not maintain adequate positive pressure.Clear Solid WallOur clear solid wall rooms are free standing and offer the highest of cleanroom performance. They offer the best in aesthetic qualities and are well suited to areas where presentation is critical. The performance of a solid wall allows greater pressure differential to be achieved compared to a softwall room. We use the latest in polymer glazing to ensure a good seal combined with hi-impact resistance and durability.Filter/Fan Unit (FFU)Provides an average air flow velocity of 0.45m/sec and air flow of 1102 m3/hour under filter load, creating up to 300 air changes per hour. Low noise level fan unit: 50dBA, Low-Profile design These reliable, self-powered Filter/Fan Units provide a reliable flow of HEPA filtered air to meet any cleanliness standard down to Class 100. HEPA (High-Efficiency Particulate Air) filter, rated 99.99% efficient and removal of particles 0.3µm and larger. The aluminium lid and body enclose a forward-inclined centrifugal-type fan/motor with permanently lubricated bearings. 2 x 4

For more information on Modular Cleanroom Design talk to Connect 2 Cleanrooms Ltd