Add My Company
Complete forming set for making accurate, quality jump rings Supplied with 20 varying round mandrels from 2.5mm - 12mm diameter Suitable to be used with Dremel Fortiflex large and Foredom handpieces 1 year warranty This Durston Jump Ring Maker Complete Forming Set is ideal for creating your own perfectly crafted jump rings in various sizes. This complete Jump Ring Maker from Durston gives you the tools you need to make large batches of jump rings in one of 20 different sizes, from almost any kind of wire, to a precision finish ready to solder. The major benefit from the predecessor is that this model is able to be separated, thus allowing you to access all the tools easier and with more space. It features: A coil holder (attached to the base for stability) A safety coil winder which can be positioned to suit your needs A jump ring cutter A hand piece cover fully compatible with Dremel Fortiflex large and Foredom handpieces 20 round mandrels (2.5mm-12mm diameter) Durston lubricant Simply select one of the 20 mandrels from 2.5mm to 12mm and insert into the coil holder, and you are ready to start producing your own jump rings for your jewellery designs. Insert one end of your chosen wire into the hole in the mandrel and fold over so that it does not come loose. Then, rotate the handle of the coil holder while using your other hand to feed the wire onto the mandrel to create a tight, even coil. Using snips, cut the coil loose from the mandrel before screwing into the spring-loaded cutting base. Finally, attach the cutting blade and hand piece cover to your large hand piece to evenly cut through your jump rings. Once cut, unscrew the coil holder to remove the finished jump rings! Each mandrel is 12cm long. Sizes included are: 2.5mm, 3mm,3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm and 12mm. Maximum wire thickness for inserting into mandrel hole is approximately 1.85mm. This product is supplied in a sturdy, powder coated aluminium base which should be screwed to a work surface before use. Please note the following when in use: Apply lubrication on the jump rings before cutting through them in the machine, this will prolong the life of the blade, when cutting ensure you have full revs on and are using full force. We recommend a nut on either side of the machine when cutting 9mm jump rings or larger Always wear safety goggles Compatible Foredom hand piece: 999 FD05 and 999 FD28. This product comes with a 1 year guarantee.
For more information on Durston Jump Ring Maker Complete Forming Set, please contact us on 0345 100 1122.
For more information on Durston Jump Ring Maker Complete Forming Set talk to Cooksongold