Add My Company
Sign In
Looking for further information about DF Range 2 Bolt Flange Housings?
Pre-Mounted - Glacier DU or DX steel backed bearings are pre-mounted in captive inner members. Accommodate shaft misalignments up to 15°Self-Aligning - Precise positioning and accurate alignment during installation are unnecessaryHigh Performance - Eliminates edge loading thus allowing full use to be made of DU and DX performanceLong Life - DU and DX give long life with minimum maintenance. Sealing is unnecessary in most applications.Easy Assembly - Working clearance of bearings on shaft eliminates press-fitting needed with some rolling element bearingsEconomy - Standard stock sizes offered at low unit and low assembly costs. DU and DX ensure low operating costs.Shaft Location - Shaft collar or shoulder can provide axial location where necessary. If moderate thrust is expected standard Glacier thrust washers can be included.Standard Range- Three types - Plummer (or pillow) block, Four bolt flange mounting. Two bolt flange mounting.Ex-Stock - Metric and Inch ranges available ex stock for nominal shaft diameters from 10mm to 100mm and 1/2" to 4".Materials- Standard bearing housings are grey cast iron. Other materials are available (See 'Specials') Bearings can be specified in DU or DX material according to requirement. Both materials are supplied with pre-finished bores.Selection- DU is a high performance dry-bearing material, used where lubrication is impracticable or undesirable and where the operating temperature is between -200°C and +280°C. DX gives outstanding performance when greased on assembly only. Re-greasing at extended intervals prolongs performance indefinitely. DX is suitable for operating temperatures up to 120°C.Specials - Pre-mounted self-aligning bearings other than the standards listed can be supplied to special order. more info use to be made of DU and DX performance
Please contact us for further information about DF Range 2 Bolt Flange Housings.
Pre-Mounted - Glacier DU or DX steel backed bearings are pre-mounted in captive inner members. Accommodate shaft misalignments up to 15°Self-Aligning - Precise positioning and accurate alignment during installation are unnecessaryHigh Performance - Eliminates edge loading thus allowing full use to be made of DU and DX performanceLong Life - DU and DX give long life with minimum maintenance. Sealing is unnecessary in most applications.Easy Assembly - Working clearance of bearings on shaft eliminates press-fitting needed with some rolling element bearingsEconomy - Standard stock sizes offered at low unit and low assembly costs. DU and DX ensure low operating costs.Shaft Location - Shaft collar or shoulder can provide axial location where necessary. If moderate thrust is expected standard Glacier thrust washers can be included.Standard Range- Three types - Plummer (or pillow) block, Four bolt flange mounting. Two bolt flange mounting.Ex-Stock - Metric and Inch ranges available ex stock for nominal shaft diameters from 10mm to 100mm and 1/2" to 4".Materials- Standard bearing housings are grey cast iron. Other materials are available (See 'Specials') Bearings can be specified in DU or DX material according to requirement. Both materials are supplied with pre-finished bores.Selection- DU is a high performance dry-bearing material, used where lubrication is impracticable or undesirable and where the operating temperature is between -200°C and +280°C. DX gives outstanding performance when greased on assembly only. Re-greasing at extended intervals prolongs performance indefinitely. DX is suitable for operating temperatures up to 120°C.Specials - Pre-mounted self-aligning bearings other than the standards listed can be supplied to special order. more info use to be made of DU and DX performance
Please contact us for further information about DF Range 2 Bolt Flange Housings.
For more information on DF Range 2 Bolt Flange Housings talk to Criptic-Arvis Ltd
Enquire Now
List your company on FindTheNeedle.