ALL-TEST Pro 5 Motor Circuit Analyser

The ALL-TEST PRO 5™ tests all types of motors, including induction, synchronous, AC, DC, brushless DC, servo and wound rotors, as well as single phase motors. The health of all motor components is evaluated, including, but not limited to: induction windings and rotors; DC field windings and armatures; and field and rotor coils in synchronous motors. Single and 3-phase transformers, pole and pad mounted, are also ideal candidates for evaluation with the portable, lightweight AT5™. Single and 3-phase transformers, pole and pad mounted, are also ideal candidates for evaluation with the portable, lightweight AT5™. With a memory storage capacity for more than 650 tests, the ALL-TEST PRO 5™ has specific motor trending data accessible at the touch of a button. Test results are easily uploaded to your computer and our MCA Basic™ software provides expert diagnosis, trending, and a wide variety of printed or on-screen reports. Software is available for individual or group users. Versatile Analyses complete stator and rotor health on all types and sizes of motors, transformers and generators - induction, synchronous, servo, AC, DC and more. Sensitive Detects faults at their earliest stages before motor failure, including deteriorating or contaminated insulation, as well as “deep” winding faults. Fast Testing only takes a few minutes. An auto diagnosis within the instrument will provide an immediate motor health status report. Convenient Tests can be taken from the motor control center and from distances of over 1,000 feet away - ideal for hard-to-reach motors. Comprehensive Expert software provides fault diagnosis plus trending of all data. FEATURESComplete stator & rotor analysis - detect Early faults in AC & DC motors, transformers and generators. Auto diagnosis within instrument - immediate health status report. Route-based testing and trending - ideal for predictive maintenance. Tests can be performed from distances of more than 1,000 feet away. Menu driven with on-screen prompts. Report shows bad connections, winding & turn faults, air gap, broken bar, contamination and ground faults. Battery-powered, hand-held and weighing less than 2 lbs.ALL-TEST Pro MCA Family Video ALL-TEST Pro 5 Specifications Test Frequencies50, 100, 200, 400, 800 Hz.Test Value Static / Reference Value Static0.01-10000 +1% (Dimensionless calculated value).Stator Test DynamicRepeatability +1% (of measured data and calculated deviations).Rotor Test DynamicRepeatability +2% (of measured data and calculated deviations).Resistance0.01-999 Ω measurement range 0.01-99.9 Ω +1%, Max Resolution: 0.01 mΩ 100 Ω-500 Ω +1.5%, displayed as whole numbers 501 Ω-999 Ω +2.5%, displayed as whole numbers Relative Accuracy “Phase to Phase” + 0.1% True 4-wire Kelvin measurement (Compensation for thermoelectric offset voltages).Impedance0.1-999 +2%, Max Resolution: 0.01 Relative Accuracy “Phase to Phase” + 0.2%.Inductance1-999mH measurement range 1-200mH +2%, all other values +3% Relative Accuracy “Phase to Phase” + 0.2%.Phase Angle1-90° +1°, Max Resolution: 0.1° Relative Accuracy “Phase to Phase” + 0.1°.I/F (current/frequency)-50%~+99% + 1%, Max Resolution: 0.1 % Relative Accuracy “Phase to Phase” + 0.1%.Dissipation Factor - DF (frame - stator)1-100% measurement range (expressed as a percentage) 1-10% +0.75% (C = 10-1000 nF) +1.0% (all other values of C within range 2-2000 nF) 10-30% +1.0% (This specification is based on battery operation and USB not connected to PC).Capacitance (frame - stator)2-2000 nF measurement range; 10-2000 nF +5% (This specification is based on battery operation and USB not connected to PC).Insulation Resistance0-999 MΩ @500V or 1000V 1-100 MΩ +3%, all other values +5%.KeyboardAlphanumeric, sealed tactile switches with backlight overlay.Connections3x Motor input/output: push-pull connectors 4-pole High Voltage output: ø 4mm safety jack PC communication: USB type B connector Charger input: 2.5mm diameter center pin DC-jack.DisplayGraphic LCD, monochrome 128 x 128 pixels (3.8”); white LED backlight.Temperature RangeStorage: -20°C to +55°C (-4°F to +131°F) Operating: -10°C to +50°C (+14°F to +122°F).SafetyIEC 61010-1 3rd Edition.CertificationCE.EMCEmission: EN61000-6-4 Immunity: EN61000-6-2, EN61000-4-2, EN61000-4-3.Batteries2x Li-ION cells with ? 2100 mAH capacity, UL 1642 (Safety).MaterialPolycarbonate, UL94 V-0 (Flammability).Dimensions126 x 218 x 51 mm (5” x 8.6” x 2”) (W x L x H) (basic enclosure size without minor protrusions).Weight0.7 kg (1.55 lb.).ALL-TEST Pro 5™ warranty1 year limited warranty Optional 2 years available with calibration.

For more information on ALL-TEST Pro 5 Motor Circuit Analyser talk to Cuthbertson Laird Group