Clare SafeCheck 8 Hire and Rental Industry PAT Tester

The only dedicated Hire and Rental Industry specific PAT tester! The Clare SafeCheck 8 tester from Seaward has been ergonomically designed for rugged bench use within service and repair centres. It features a large high contrast LCD display and the user interface is clear and simple, with test sequences pre-configured for Class I grounded, Class II double insulated, and extension lead/power cord product types. Additional test sequences can also be programmed into the tester either from the menu or simply from a series of barcodes that can be held within a work instruction document issued to the operator or service centre. The results are recorded and the information is displayed on a large clear LCD screen. In order to eliminate potential data entry errors and to speed up the test process, the tester can also be used with a barcode reader which scans in the equipment’s ID number. SafeCheck 8 helps you meet your safety obligations whilst improving productivity. FEATURES Stores up to 2400 results including appliances, location, site, date and time in non-volatile flash memory. Accurate Earth Bond and leakage measurement even when multiple Earth paths exist. Qwerty keyboard with fast keys. Full graphics display, Real-time clock. Connects to PC, Barcode reader and printer. Compatible with Seaward PATGUARD and other leading software packages. Software adjusts the user interface to differing levels of expertise. Fast Start-up. Simple user interface and generic settings enable immediate testing without the need to enter the setup procedures. Should the user need alternative test settings, they are fully user definable via the setup menu. Super-fast download up to 10 times faster than existing testers. Clare SafeCheck 8 Specifications Flash / Hipot Test (Class I) Test Voltage Class l 1.25kV AC. Display Range 0.1 - 10 mA AC. Resolution 0.01 mA. Accuracy +/- 5% +/- 2 digits. Pass Levels selectable up to 10 mA. AC Flash / Hipot Test (Class II) Test Voltage Class ll 2.5 kV AC. Display Range 0.1 - 10 mA AC. Resolution 0.01mA. Accuracy +/- 5% +/- 2 digits. Pass Levels selectable up to 10 mA. DC Insulation Test Test voltage 500 V. Display Range 0.1 - 99.99 MΩ. Accuracy +/- 5% +/- 2 digits (up to 19.99 MΩ). Earth / Ground Bond Test Test Voltage 6V AC (open circuit). Test Current 25 A, 10 A, 4 A, 100 mA AC into short circuit. Range 0.04 Ω - 20 Ω. Resolution 1 mΩ. Accuracy +/- 5% +/- 2 digits. Pass levels user selectable. Substitute Leakage (Short to Case Test) Test Voltage 40 V AC o/c. Display Range 0.1 - 20.0 mA AC. Resolution 0.01 mA. Accuracy +/- 10% +/- 2 digits (1.00 - 20 mA). Pass levels selectable up to 15 mA. Earth Leakage Test Voltage Mains Supply. Display Range 0.1 - 20.0 mA AC. Resolution 0.01 mA. Accuracy +/- 10% +/- 2 digits (1.00 - 20 mA). Pass levels selectable up to 10 mA. Power / Run / Load Test Resolution 0.01 kVA. Measured Load 0 - 4 kVA. Accuracy +/- 10 of reading, +/- 2 digits. IEC Power Cord Test Test voltage 40V AC. Detects Good, Open, Short, Reversed. General Specifications Supply voltage Selectable 115V / 230 V 50 or 60 Hz. Operating Temperature 0° C to +40° C Dimensions 450W x 410H x 155D mm. Weight Approx 8.8 kg. Clare SafeCheck 8 warranty One year.

For more information on Clare SafeCheck 8 Hire and Rental Industry PAT Tester talk to Cuthbertson Laird Group