Drummond MTL10 Test Lamp

The John Drummond MTL10 gives safe indication of voltage between 50V and 500V AC and 50V to 750V DC. The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38) as well as complying with BS EN61243-3 and BS EN61010, CATIII 1000V and CAT IV 600V. Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that might compromise the user’s safety, and is resistant against heat and oil. To enable use in most circumstances, a right angled probe tip is supplied in addition to the two straight tips. Four distinctive bands of illumination, with a 360 degree viewing angle, provide indication of voltages above 50, 100, 200 and 400 volts even in bright sunlight, allowing accurate identification of potentially lethal voltages at 50V and enabling the user to distinguish between 110V, 230V and phase to phase voltages in a 3 phase system. Drummond MTL10 & MTL20 Product Video Drummond MTL10 Specifications Electrical Maximum working voltage 500V AC, 750V DC. Nominal voltage threshold indications 50, 120, 230, 400 V AC/DC. Nominal voltage threshold tolerance Conforms to BS EN 61243-3:2010. Range detection. Automatic. Response time <0.1s. Frequency range DC, 40 - 65 Hz. Duty ratio 30s ON (operated) / 240s OFF (recovery) Environmental Temperature (Operating & Storage) -10°C to 55°C. Humidity (Operating & Storage) ? 85% R.H Safety Pollution degree 2. Conforms BS EN 61243-3 CAT IV 600V, CAT III 1000V. IP Rating IP64. EMC Conforms to BS EN 61326-1. General Specifications Power from circuit under test. Dimensions 213(L) x 112(W) x 72(D) mm. Weight (packed) 320g approx. Drummond MTL10 warranty 2 years.

For more information on Drummond MTL10 Test Lamp talk to Cuthbertson Laird Group