Drummond MTL10PD Test Lamp and Proving Device

The Martindale MTL10PD contains the Drummond MTL10 test lamp and the PD440 proving device, enabling you to comply with health and safety recommendations for safe working. It is an essential aid for electricians and comes with a carry case (TC69). The PD440 proving device can be used to verify the functioning of the test lamp. Drummond MTL10 Specifications Electrical Maximum working voltage 500V AC, 750V DC. Nominal voltage threshold indications 50, 120, 230, 400 V AC/DC. Nominal voltage threshold tolerance Conforms to BS EN 61243-3:2010. Range detection. Automatic. Response time <0.1s. Frequency range DC, 40 - 65 Hz. Duty ratio 30s ON (operated) / 240s OFF (recovery) Environmental Temperature (Operating & Storage) -10°C to 55°C. Humidity (Operating & Storage) ? 85% R.H Safety Pollution degree 2. Conforms BS EN 61243-3 CAT IV 600V, CAT III 1000V. IP Rating IP64. EMC Conforms to BS EN 61326-1. General Specifications Power from circuit under test. Dimensions 213(L) x 112(W) x 72(D) mm. Weight (packed) 320g approx. Drummond MTL10 warranty 2 years. Martindale PD440 Specifications Electrical Output voltage 440 V nominal. Operating temperature -10°C to +40°C at max 70% RH. Battery 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent. Dimensions 143 x 84 x 50 mm. Weight 400g approx including battery.

For more information on Drummond MTL10PD Test Lamp and Proving Device talk to Cuthbertson Laird Group