Fluke 123B Industrial ScopeMeter

The Fluke 123B is a truly integrated test tool, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The 123B scopemeter also integrates with Fluke Connect® mobile app and FlukeView® for ScopeMeter software to enable further collaboration, data analysis and archiving of critical test information. The 123B Industrial ScopeMeter test tools include innovative functions designed to help technicians troubleshoot faster and get the answers they need to keep their systems up and running. Display waveforms with Connect-and-View™ trigger and setup technology and automatically view related numerical measurements using Fluke IntellaSet™ technology, all without making manual measurement adjustments. With Recorder Event Detect capabilities, elusive intermittent events are captured and logged for easy viewing and analysis. KEY MEASUREMENTS 20MHz Oscilloscope, Dual Input Multimeter and Recorder. One test lead to measure multiple electrical parameters High frequency waveform, meter, capacitance and resistance measurements as well as continuity checks are all covered by single set of shielded test leads. No time is wasted finding or swapping leads. FEATURES Dual-input digital oscilloscope and multimeter. 20 MHz oscilloscope bandwidth. Two 5,000-count true-rms digital multimeters. Connect-and-View™ trigger simplicity for hands-off operation. IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal. Dual-input waveform and meter reading recorder for trending data over extended periods. Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 10 KHz. Shielded test leads for oscilloscope, resistance and continuity measurements. Resistance, continuity, diode and capacitance meter measurements. Check Industrial networks with BusHealth physical layer tests against defined reference levels. Save or recall data and instrument setups. Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures. External optically isolated USB interface to transfer, archive and analyze scope or meter data. Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app. FlukeView® ScopeMeter® Software for Windows®. Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529. Highest safety rating in the industry: safety rated for CAT IV 600 V. Li-Ion rechargeable battery, seven-hours operation (with four-hour charge time). Scopemeter Comparison Product Comparison Chart Fluke 123B Fluke 124B Fluke 125B FUNCTIONS Full Function Dual Input Scope and Meter Oscilloscope Bandwidth MHz 20 40 40 Meter and Scope Recorder Scope Cursor Measurements BusHealth INCLUDED ACCESSORIES 10:1 voltage probe i400S AC current clamp Fluke 120B Series Scopemeter Product Video Fluke 123B Specifications Dual Input Meter The accuracy of all measurements is within +(% of reading + number of counts) from 18 °C to 28 °C. Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C. For voltage measurements with 10:1 probe, add probe uncertainty +1%. More than one waveform period must be visible on the screen. Input A and input B - DC voltage (VDC) Ranges 500 mV, 5 V, 50 V, 500 V, 750 V. Accuracy +(0.5% +5 counts). Common mode rejection (CMRR) >100 dB @ dc, >60 dB @ 50, 60, or 400 Hz. Full scale reading 5000 counts. True-rms voltages (V ac and V ac+dc) Ranges 500 mV, 5 V, 50 V, 500 V, 750 V. Accuracy for 5% to 100% of range (DC coupled) DC to 60 Hz (V ac+dc) - +(1% +10 counts) 1 Hz to 60 Hz (V ac) - +(1% +10 counts). Accuracy for 5% to 100% of range (AC or dc coupled) 60 Hz to 20 kHz - +(2.5% +15 counts). DC rejection (only VAC) >50 dB. Common mode rejection (CMRR) >100 dB @ dc >60 dB @ 50, 60, or 400 Hz. Full scale reading 5000 counts, reading is independent of any signal crest factor. Peak Modes Max peak, Min peak, or pk-to-pk. Ranges 500 mV, 5 V, 50 V, 500 V, 2200 V. Accuracy Accuracy Max peak or Min peak: 5% of full scale Accuracy Peak-to-Peak: 10% of full scale. Full scale reading 500 counts. Frequency (Hz) Ranges 123B: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz,1 MHz, 10 MHz, and 50 MHz. Frequency range 15 Hz (1 Hz) to 50 MHz in continuous autoset. Accuracy @1 Hz to 1 MHz +(0.5% +2 counts). Full scale reading 10,000 counts. RPM Max reading 50.00 kRPM. Accuracy +(0.5% +2 counts). Duty cycle (PULSE) Range 2% to 98%. Frequency range 15 Hz (1 Hz) to 30 MHz in continuous autoset. Pulse width (PULSE) Frequency range 15 Hz (1 Hz) to 30 MHz in continuous autoset. Full scale reading 1000 counts. Amperes (AMP) With current clamp Ranges: Same as V dc, V ac, V ac+dc, or PEAK Scale factors: 0.1 mV/A, 1 mV/A, 10 mV/A, 100 mV/A, 400 mV/A, 1 V/A, 10 mV/mA. Temperature (TEMP) with optional temperature probe Range 200 °C/div (200 °F/div). Scale factor 1 mV/°C and 1 mV/°F. Accuracy As V dc (add temp. probe uncertainty). Decibel (dB) 0 dBV 1 V. 0 dBm (600 Ω /50 Ω) 1 mW referenced to 600 Ω or 50 Ω. dB on V dc, V ac, or Vac+dc. Full scale reading 1000 counts. Crest factor (CREST) Range 1 to 10. Full scale reading 90 Counts. Phase Modes A to B, B to A. Range 0 to 359 degrees. Resolution 1 degree. Miscellaneous Display 5.7-inch color active matrix TFT 640 x 480 pixels. Waveform Display Vertical: 10 div of 40 pixels Horizontal: 12 div of 40 pixels. Power External: Via Power Adapter BC430 Input voltage: 10 V DC to 21 V DC Power consumption: 5 W typical Input connector: 5 mm jack Internal: Via Battery Pack BP290 Battery power: Rechargeable Li-Ion 10.8 V Operating time: 7 hours with 50% backlight brightness Charging time: 4 hours with test tool off, 7 hours with test tool on Allowable ambient temp: 0 to 40 °C (32 to 104 °F) during charging. Memory Internal memory can store 20 data sets (screen waveform and setup). Interface Optically isolated: Transfer screen copies (bitmaps), settings and data USB to PC/laptop: OC4USB optically isolated USB adapter/cable, (optional), using FlukeView® software for Windows®.. Dimensions 259 x 132 x 55 mm (10.2 x 5.2 x 2.15 in). Weight 1.4 kg (3.2 lb) including battery pack. Fluke 123B warranty 3 years.

For more information on Fluke 123B Industrial ScopeMeter talk to Cuthbertson Laird Group