Fluke 6500-2 Portable Appliance Tester Kit

The Fluke 6500-2 PAT tester is a low weight, small size, one-touch solution with redesigned auto-test capabilities to help you increase the number of portable appliance tests completed each day. The 6500-2 is designed to enable you to work faster without compromising test results. With a full QWERTY keyboard, alphanumeric data entry is faster, easier and more convenient. The integral site, location and description codes further speed up data entry on site, and contribute to more efficient testing and results management. The 6500-2 stores in excess of 1000 test results in its main memory. These can be written to the USB drive for back-up. Data can be sent to the office for generating customer reports while the instrument continues with a cleared memory in the field. FEATURES Dedicated key for each test for ‘one-touch’ testing. Pre-set pass/fail levels to save time. Single mains socket for appliance connection. Separate IEC socket for easy mains/extension lead testing. USB port for data transfer. Integral QWERTY keyboard for rapid data entry. Pre-set, auto-test sequences for user convenience. Integral site, location and description codes for faster data processing. Fluke 6500-2 Specifications Test Specifications The accuracy specification for the display range is defined as +(%reading + digit counts) at 23 °C +5 °C, ?75 % RH. Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy specifications may degrade by 0.1 x (accuracy specification) per °C. The measurement range meets the service operating errors specified in EN61557-1: 1997, EN61557-2: 1997, EN61557-4: 1997, EN61557-6: 1997, DIN VDE0404-2. Power-on Test The test indicates reversed L-N, missing PE, and measures the mains voltage and frequency. Display Range 90 V to 264 V. Accuracy at 50 Hz + (2% + 3 counts). Resolution 0.1 V. Input Impedance > 1 MΩ // 2.2 nF. Maximum Input Mains Voltage 264 V. Earth Bond Test (Rpe) Display Range 0 to 19.99 Ω. Accuracy (After Bond Test Zeroing) + (2.5% + 4 counts). Resolution 0.01 Ω. Test Current 200 mA AC -0% +40% into 1.99 Ω 25 A AC + 20% into 25 mΩ at 230 V. Open Circuit Voltage > 4 V AC, < 24 V AC. Bond Test Zeroing can subtract up to 1.99 Ω. Insulation Test (Riso) Display Range 0 to 299 MΩ. Accuracy + (5% + 2 counts) from 0.1 to 300 MΩ. Resolution 0.01 MΩ (0 to 19.99 MΩ) 0.1 MΩ (20 to 199.9 MΩ) 1 MΩ (200 to 299 MΩ). Test Voltage 500 V DC -0% + 25% at 500 kΩ load or 250 V dc -0 % +25 % at 250 kΩ load. Test Current > 1 mA at 500 kΩ load, < 15 mA at 0 Ω. Auto Discharge Time < 0.5 s for 1 µF. Max. Capacitive Load Operational up to 1 µF. Touch Current Test Display Range 0 to 1.99 mA AC. Accuracy + (4% + 2 counts). Resolution 0.01 mA. Internal Resistance (via Probe) 2 kΩ. Measuring Method Probe*. Substitute Leakage Current Test Display Range 0 to 19.99 mA AC. Accuracy + (2.5% + 3 counts). Resolution 0.01 mA. Test Voltage 100 V AC + 20%. Load/Leakage Test: Load Current Display Range 0 A to 13 A. Accuracy + (4% + 2 counts). Resolution 0.1 A*. Load/Leakage Test: Load Power Display Range 230 V Mains 0.0 VA to 3.2 kVA. Accuracy + (5 % + 3 counts). Resolution 1 VA (0 to 999 VA), 0.1 kVA (>1.0 kVA)*. Load/Leakage Test: Leakage Current Display Range 0 to 19.99 mA. Accuracy + (4% + 4 counts). Resolution 0.01 mA*. PELV Test Accuracy at 50 Hz + (2% + 3 counts). Overload Protection 300 V rms. Warning Threshold 25 V rms. RCD Test: Trip Current Operational Error +10 %. Nominal 30 mA. Accuracy +5 %. RCD Test: Trip Time Standard Requirement 61557 Part 6; tolerance of rated test current 0 % to +10 %. Operational Error +10 %. RCD Type AC general-purpose 30 mA. Display Range 310 ms. Resolution 0.1 ms. Accuracy 3 ms. Trip Time Limit at 100 % (30 mA) 300 ms. Trip Time Limit at 500 % (150 mA) 40 ms. *The appliance under test is energised at mains potential. Environmental Specifications Operating Temperature 0 to 40 °C. Relative Humidity Non condensing < 10 °C 95% from 10 to 30 °C 75% from 30 to 40 °C. Safety Specifications Safety Rating Complies with EN61010-1 3rd edition. CAT II, 300 V, pol 2. Mechanical & General Specifications Dimensions 200 mm (L) x 275 mm (W) x 114 mm (H). Weight 3.13 kg. Power Supply 230 V +10 % -15 %, 50 Hz +2 Hz or (6500-2 only: 110V +10 % -15 %,50 Hz +2 Hz). Power Consumption (Tester) 13 W typical (idle) 60 W max. during 25A Bond test. Storage Temperature -10 to 60 °C. Corrosion 70 °C @ 95 % RH for 5 days max. Operating Altitude 0 up to 2000 m. Sealing IP-40 (enclosure), IP-20 (connectors). EMC Complies with EN61326-1, portable. EMI Immunity 3 V/m. Fluke 6500-2 warranty 2 years.

For more information on Fluke 6500-2 Portable Appliance Tester Kit talk to Cuthbertson Laird Group