Fluke 902 FC True-rms HVAC Clamp Meter

The Fluke 902 FC True-rms HVAC Clamp Meter, a wireless Fluke Connect®-enabled meter, improves the productivity of HVAC technicians in the field. The rugged dual rated - CAT III, 600 /CAT IV, 300 V - meter performs the essential measurements of HVAC systems - microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature - eliminating the need to carry multiple tools. Its small body is easy to hold and the jaw fits perfectly in tight work spaces. The clamp meter also decreases the frequency that technicians will need to wear personal protective equipment when working on high voltage/current panels. Simply turn off the panel, verify the panel is de-energised using standard safety procedures, place the clamp and sync it to a smartphone with the Fluke Connect app, close the panel, reenergize it, and take measurements from a safe distance. FEATURES 200 µA DC current measurements to measure flame rod. Extended resistance range to measure thermistors up to 60kΩ. Capture flue gas temperature. Measure start and run motor capacitors. Measure performance of variable frequency drives. Fluke Connect connects your meter to your phone through Bluetooth. Read measurements on your phone at a safe distance. Create and email reports right from the field. TPAK magnetic strap (optional) allows you to conveniently hang the meter while using the probes. Ergonomic design fits in your hand and can be used while wearing personal protective equipment. Large, easy-to-read backlit display. Fluke 902 FC Specifications Function A ac (via Jaw) Resolution 0.01/0.1 A. Accuracy 2.0% +5 digit (45-65 Hz) 2.5% +5 digit (65-400 Hz). Range 60.00/600.0 A. Crest Factor (50Hz or 60Hz) 2.5 A 3.0 A > 1.4 A Add 2% for CF>400 A. V ac Resolution 0.1 V. Accuracy 1.5% +5 digits. Range 600.0 V. V dc Resolution 0.1 V. Accuracy 1.5% +5 digits. Range 600.0 V. Ohms Resolution 0.1/1/10. Accuracy 1% +5 digits. Range 600/6000/60.00 kΩ. Capacitance Resolution 0.1/1 µF. Accuracy 1% +4 digits. Range 100.0/1000 µF. µA Resolution 0.1 µA. Accuracy 1% +5 digits. Range 200 µA. Contact temperature Resolution 0.1 C/F. Accuracy 1% +8 digits. Range -10 to 400 °C (14 °F to 752 °F). Continuity beeper Beeper volume 75 dBA nom. 15 cm. from case front. On threshold <=30 Ω. Mechanical and General Specifications Maximum voltage between any terminal and earth ground 1000 V. Battery type 2 AA alkaline batteries, NEDA 15A, IEC LR6. Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F) Storage: -40 °C to +60 °C (-40 °F to +140 °F). Operating humidity Non condensing (< 10 °C [50 °F]), ?90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ?75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ?45 % RH (at 40 °C to 50 °C (104 °F to 122 °F)). Altitude Operating: 3,000 m (9,842 ft) Storage: 12,000 m (39,370 ft). Dimensions 230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in). Weight (meter only) 419 g (15 oz). Safety IEC 61010-1, Pollution Degree 2 IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V. IP Rating IEC 60529: IP30, non-operating. Radio Frequency Certification FCC ID:T68-FBLE IC:6627A-FBLE. Electromagnetic Compatibility (EMC) International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Temperature coefficients Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C.

For more information on Fluke 902 FC True-rms HVAC Clamp Meter talk to Cuthbertson Laird Group