Martindale HPAT600/2 PAT Tester

The Martindale HPAT600/2 is an easy to use battery powered, hand held PAT tester that is ideal for testing all types of portable appliances. The tester is supplied with rechargeable batteries for low running costs and a mains and in-car charger for convenience. Whilst recharging, the HPAT can still be operated from the mains supply ensuring maximum productivity at all times.The HPAT600/2 can be operated in either of two test modes. In the Manual test mode, aimed at the newcomer to PAT testing, a connection diagram for the selected test type is shown on the display. Each step of a test type requires confirmation by a press of the OK button. In the Auto test mode, for the experienced operator, the HPAT600 will automatically run through a selected test type without any further user interaction unless a failure is encountered.A null function is incorporated in the HPAT600/2 to compensate for the test probe lead resistance when used for Class I earth continuity measurements. This allows for alternative test probes to be used if desired.The HPAT600 stores test data for up to 200 appliances which can be easily reviewed on the instrument if you need to check a result on site. It also has a simulated load test to check the load and ensure that the appliance is switched on with a good fuse. The HPAT600/2 has a new high contrast backlit display.The HPAT600/2 will perform the following test types:IEC Lead test sequence. Class I test sequence. Class II test sequence. Simulated Load test. Class I Earth Continuity single test. Class I Insulation single test. Class II Insulation single test.FEATURESEasy to use automatic and manual testing. Displays measured values with clear PASS/FAIL indication. Class I, Class II & power lead tests. I.T. safe 200mA DC earth bond test with two pass levels. 250V insulation test option for surge protected devices & sensitive IT equipment. Test both 240V and 110V appliances. Rechargeable with both mains and in-car chargers included. Memory with on-screen recall for 200 sets of results.Martindale HPAT500 & HPAT600 Product Video Martindale HPAT Comparison ChartHPAT400HPAT500/2HPAT600/2Class I /II Test???Lead Test???Pass/Fail Indication???Test Values Displayed-??Selectable Limits--?Test ModeAutoAutoAuto/ManualRun Test--SimulatedEarth Continuity Test Current200 mA200 mA200m AInsulation Test Voltage500 V250/500 V250/500 V110V AppliancesWith accessoryWith accessoryWith accessoryMemory--200 results for on-screen recallSupplyAlkaline batteriesRechargeableRechargeableMartindale HandyPAT600/2 SpecificationsEarth ContinuityTest Voltage4 V DC (into open circuit).Test Current200 mA DC (into short circuit).Range0 - 19.99 Ω.Resolution0.01 Ω.Accuracy+ (5% reading + 2 digits).Default PASS Levels (Class I)0.1 Ω.Default PASS Levels (Lead)0.1 Ω.User Selectable Pass Levels0.1 Ω to 0.9 Ω in 0.1 Ω steps.InsulationTest Voltage (500 V Range)>500V DC at 1mA ( < 600V DC into open circuit).Test Voltage (250 V Range)>250V DC at 1mA ( < 300V DC into open circuit).Test Current1.5mA (into short circuit).Ranges2.00MΩ, 20.0MΩ, 200MΩ.Resolution0.01MΩ.Accuracy+ (5% reading + 2 digits).Default Pass Level (Lead)1 MΩ.Default Pass Level (Class I)1 MΩ.Default Pass Level (Class II)2 MΩ.User Selectable Pass Levels0.3 MΩ to 1 MΩ in 0.1 MΩ steps 1 MΩ to 10 MΩ in 1 MΩ steps.Fuse TestTest Voltage4 V DC (into open circuit).Test Current200 mA DC (into short circuit).Pass Level>2 mA.Simulated Load TestTest Voltage4 V DC (into open circuit).Test Current200 mA DC (into short circuit).Accuracy+ (5% reading + 2 digits) (referenced to 230 V).GeneralMemoryCompleted test types that can be stored: 200.Overload Protection300 V AC/DC.Protection ClassIP20.SafetyComplies to BS EN 61010-1:2001.Temperature Range-10 to 40°C, non-condensing.Power Supply6 x 1.2 V AA NiMH rechargeable batteries 1800 mAh, or greater.Dimensions90 x 210 x 54 mm.WeightApprox 700g (including batteries and leads).

For more information on Martindale HPAT600/2 PAT Tester talk to Cuthbertson Laird Group