Megger DET2/2 High Resolution Earth Tester

This product is now obsolete and has been replace by the DET2/3. The Megger DET2/2 digital ground resistance tester provides a wide resistance range from 0.010 Ω to 19.99 kilohms for testing larger or more complex grounding systems and for difficult testing environments, with +0.5% accuracy and 0.001 Ω resolution. Microprocessor control and advanced filtering simplify testing in environments with high levels of interference. The DET2 uses the four terminal method of measurement which eliminates the resistance of the current circuit from the measurement. The circuit design ensures that the resistance of the potential circuit does not affect the measurement during practical testing. The Megger DET 2/2 is built into a robust plastic case and has its four terminals, equipped for spade or 4 mm connectors, mounted on the front panel. The instrument is microprocessor controlled and provides a flexible, ‘user-friendly’ approach to earth testing by giving good error detection capabilities and full test information on a large easily readable alpha-numeric display. A simple key pad can be used to adjust the test frequency, the test current level and the filtering so that adverse conditions influencing the test may be overcome. The Megger DET2/2 is built into a robust plastic case and has its four terminals, equipped for spade or 4 mm connectors, mounted on the front panel. FEATURES Accurately measures ground resistance under the most demanding conditions. High resolution - 0.001 Ω with autoranging. 50V max. test voltage for safety. Rechargeable battery power with long battery life and rapid re-charge. Filter and high current features. Simple menu-driven operation. Megger DET2/2 Specifications Earth / ground resistance range 0.010 Ω to 19.99 kΩ (auto-ranging), 1 mΩ resolution. Accuracy (23 °C + 2 °C) +0.5% of reading +2 digits. Error +5% of reading +2 digits +10 mΩ (meets VDE service error over 50 mΩ). Compliance BS 7430 (1991) VDE 0413 Part 7 (1982). Test frequency 105 to 160 Hz reversing d.c. (50 Hz operation default to 128 Hz, 60 Hz operation default to 150 Hz) Set in steps of 0.5 Hz. Test current range 50 mA max (selectable high and low levels). Maximum output voltage < 50 V r.m.s. Interference Typically 40 V peak-to-peak (50/60 Hz, sinusoidal nature). Display Alphanumeric L.C.D. (130 x 35 mm) giving test information and a large (20 mm) 3½-digit reading). Temperature co-efficient < +0.1% per °C over the temperature range -10 to +40 °C, 0.05% per °F from 14 to 104 °F. Operating temperature range and humidity -10 to +40 °C (14 to 104 °F). Storage temperature range and humidity -20 to +60 °C (-4 to +140 °F). IP rating The instrument is waterproof to IP54. Flash test 3 kV ac. Power supply Internal Rechargeable, sealed lead-acid battery. Battery life Approximately 5 hours continuous use. Battery charge time 6 hours max. (from completely exhausted). Safety The instruments meet the requirements of IEC61010-1. Dimensions 245 mm x 344 mm x 158 mm. Weight 5 kg. Megger DET2/2 warranty 2 years.

For more information on Megger DET2/2 High Resolution Earth Tester talk to Cuthbertson Laird Group