Megger EGIL200 Circuit Breaker Analyser

Developed in response to user demand for an affordable mid-range circuit breaker analyser that is fast and easy to use, the Megger EGIL 200 delivers dependable results with a minimum of user intervention. Ideally suited for testing high- and medium-voltage circuit breakers in substation and industrial applications, this versatile instrument offers a wide range of functions, including all of the standard measurements specified in the IEEE C37 and IEC 62271 standards. The EGIL 200 is based on technology used in Megger’s market-leading EGIL and TM-series circuit breaker analysers. It combines the ease of use offered by these instruments with many of the other features that have made them so popular. These include DualGroundTM timing using the patented dynamic capacitance measurement (DCM) system; and accurate PIR contact timing and PIR resistance measurement, even in difficult environments, thanks to patented Active Interference Suppression technology. Other key features of the EGIL 200 are one-click report generation to a pdf file or direct to an optional integrated printer, and robust construction that makes it suitable for use in even the most demanding of on-site conditions. In fact, the EGIL 200 is so robust that it can even be shipped as goods without the need for protective transport case. Measurements - Only a single hook-up required for: Timing of main and PIR contacts. Coil current: close, open 1 and 2 coils. Station voltage measurements . Motion measurements. Motor current measurement. FEATURES Versions for 2 or 4 breaks per phase. 1 analogue channel. 3 control channels (close, open and open2), 3 digital motion channels, 3 auxiliary contact timing channels, and Internal coil current measurement. Easy-to-use and intuitive interface. Printer option. Fitted in rugged, IP67 rated, case. INCLUDED ACCESSORIES Timing M/R cable, Timing M/R extension cable, Timing AUX cable, Control cable kit, Timing M/R clamp, Analogue cable, Lead and accessory bag, Thermal printing paper (if ordered with printer option), Ground lead 2.5/5 m, Ethernet cable 5 m, USB cable 3 m, USB memory stick, Lead ties, Power cable, User's manual. Ordering Information EGIL221 2 brk/ph, 1 analogue ch, no accessories CM-22100. 2 brk/ph, 1 analogue ch, printer, no accessories CM-22101. 2 brk/ph, 1 analogue ch, standard lead kit CM-22190. 2 brk/ph, 1 analogue ch, printer, standard lead kit CM-22191. EGIL241 4 brk/ph, 1 analogue ch, no accessories CM-24100. 4 brk/ph, 1 analogue ch, printer, no accessories CM-24101. 4 brk/ph, 1 analogue ch, standard lead kit CM-24190. 4 brk/ph, 1 analogue ch, printer, standard lead kit CM-24191. Megger EGIL200 Specifications External Outputs Trig output for SDRM20X Output voltage 12 V DC +10 %. Short circuit protection PTC 250 mA. Switching current < 250 mA, resistive load. Control Section General Control pulse outputs Close, open 1 and open 2 (Galvanically insulated from earth and each other). Time base inaccuracy +0.01 % of reading +1 sample interval. Max. sample rate 40kHz. Measurement time 36 s at 10 kHz sample rate. Non-bouncing switch Max. current 60 A AC / DC, pulse ? 20 ms. Max. continuous current 5 A. Duration User configurable in steps of 1 ms. Delay User configurable in steps of 1 ms. Current measurement Measurement range +20 A. Resolution 16 bits. Inaccuracy +2 % of reading +0.1 % of range. Voltage measurement Max. voltage 250 V AC, +300 V DC. Measurement range + 400V. Resolution 16 bits. Inaccuracy +1 % of reading +0.1 % of range. Timing M/R Section General No. of channels 6 or 12 selectable at ordering. Time base inaccuracy +0.01 % of reading +1 sample interva. Min. resolution 0.05 ms. Max. sample rate 40 kHz. Measurement time 36s at 10 kHz sample rate. Timing of main and resistor contacts Open circuit voltage Toggling +12 V +10 %. Short circuit current 30 mA +10 %. PIR resistance measurement Supported PIR types Linear PIR. Measurement range 10 Ω - 10 kΩ. Inaccuracy +10 % of reading +0.1 % of range. Voltage measurement (Only TIMING M/R, DRM/VDS inputs) Measurement ranges +50 V and +2.5 V. Resolution 16 bits. Inaccuracy +1 % of reading +0.1 % of range. Analogue Section General No. of channels 1 or 3 isolated channels. Time base inaccuracy +0.01 % of reading +1 sample interval. Max. sample rate 40 kHz. Measurement time 36 s at 10 kHz sample rate. Transducer resistance 500 Ω - 5 kΩ. Output Max. output current 30 mA. Voltage measurement Max. voltage +10 V peak. Measurement ranges +1 V and +10 V. Resolution 16 bits. Inaccuracy 1 V range +0.1 % of reading +0.1 % of range. 10 V range +1 % of reading +0.1 % of range. External current measurement Max. input +1 V peak. Scaling Selectable in software. Digital Section General No. of channels 3. Supported types Incremental transducers, RS422. Time base inaccuracy +0.01 % of reading +1 sample interval. Max. sample rate 40 kHz. Measurement time 36s at 10 kHz sample rate. Output Voltage 12 V DC +5 %. Max. output current 300 mA. Digital Input Range +32000 pulses. Resolution 1 pulse. Inaccuracy +1 pulse. Timing Aux Section General No. of channels 3 isolated channels. Time base inaccuracy +0.01 % of reading +1 sample interval. Max. sample rate 40 kHz. Measurement time 36s at 10 kHz sample rate. Max. voltage 250 V AC, +300 V DC. Contact mode Open circuit voltage 30 V DC. Short circuit current 30 mA DC. User configurable status threshold Open < -10 V < Closed < 10 V< Open (Factory default). Printer (optional) Type Thermal printer. Paper width 112 mm x 114 mm (4.41", 4.48"). Operating temperature 0 °C to +60 °C (32 °F to +140 °F). Storage & transport -20 °C to +70 °C (-4 °F to +158 °F). Environmental Operating temperature -20 °C to +55 °C (-4 °F to +131 °F). Storage & transport -40 °C to +70 °C (-40 °F to +158 °F). Humidity 5 % - 95 % RH, non-condensing. CE-marking LVD 2014/35/EU. EMC 2014/30/EU. RoHS 2011/65/EU. General Specifications Mains input (nominal) 100 - 240 V AC, 50 / 60 Hz 110 - 250 V DC. Power consumption 200 VA (max). IP rating (IEC 60528) Closed case: IP67 Open case: IP20. Display 7" (17.8 cm) LCD, Capacitive touch screen. Communication interfaces 3 USB A, 1 USB B RJ45 connector for connection to external PC On-screen and optional USB keyboard. Languages English, French, German & Swedish. Dimensions 474 x 415 x 214 mm (18.7” 16.3” 8.4). Weight 12 kg (26.5 lbs).

For more information on Megger EGIL200 Circuit Breaker Analyser talk to Cuthbertson Laird Group