KWS Spring Loaded Floor Buffer/Holder With Locking Hook - 100kg

Description KWS Door holders: K1091 - With anchor bolt for building in. K1092 - For face fixing. With locking device Rubber buffer in black, spring-loaded, anchor bolt hot-dip galvanised. Application Door Width - up to 1000mm Door Height - up to 2200mm Door Weight - up to 100kg Door Closer Suitable Operation For holding the door it is moved towards the door holder until it is caught by the hook, it is released by actuating the hook while pushing the door against the holder at the same time. The disconnecting lever, moved from position A to B (see drawing) deactivates the holding mode. Thus the door holder only has the function of a spring-loaded stop. The locking device has the effect that the hook on the door holder cannot be operated and thus it is not possible to close a door which is held open. The scope of supply includes two keys. Mounting With anchor bolt: Put in the provided anchor bolt in the floor and grout it at the desired arresting point which should be the greatest possible distance from the door hinge. After the grouting material has hardened, screw the door holder on and fix the roller block at the corresponding position on the door. Without anchor bolt: Screw the holder with four screws and the plugs on the floor in the desired position which should be the greatest possible distance from the door hinge and fix the roller block on the door at the corresponding position. Accessories For height compensation we recommend the additional use of the shim 1610 (20 mm).

For more information on KWS Spring Loaded Floor Buffer/Holder With Locking Hook - 100kg talk to D & E Architectural Hardware Ltd