AC1000 In-line Recovery Winches

To recieve your quotation please provide Model No and voltage required AC1000a 110V 1ph 50Hz AC1000a 240V 1ph 50Hz AC1000a 415V 1ph 50Hz AC1000b 110V 1ph 50Hz AC1000b 240V 1ph 50Hz AC1000b 415V 1ph 50Hz AC RECOVERY SERIES WINCHES 1000kg AC1000a (1000kg), AC1000b (1000kg) 110v or 240v x 1ph / 415v x 3ph AC See pop-up below photo right for dimensions FEATURES INCLUDE • Single or 3 phase options A choice of 110v, 240v or 415v across the range • Integral brake Provides instant, safe braking • Low profile Allows winch to be installed in narrow spaces • Freespool clutch Enables easy unspooling of wire rope • Heavy duty mounting plate and roller guide For quick and simple installation • Motor to IP54 as Standard Other options available on request • 2 metre pendant control Pre-wired to the winch with 2 buttons and emergency stop • 2 metre power lead Pre-wired to the winch with commercial type plug ADDITIONAL EQUIPMENT • Wire rope • Low voltage control (Standard on 415v x 3ph) • Radio remote control - via low voltage control • Weather proof enclosure Special winches can be built to customer requrements - see examples right SELECTING A WINCH - THINGS TO CONSIDER • The mass in kg of the loads compared to the load rating of the winch • Wire rope length, diameter and the line speed • Frequency of use • Life expectancy of machinery • Compatibility with application • Type of power likely to be available on sites and access / suitable areas • Health & Safety Regulations and suitable training Winches can be dangerous. Installations should be carried out by a professional with regard to electrical and mechanical safety requirements. It is usually advisable to over specify the capacity of a winch to ensure extended product life. EN 14492-1 SAFETY REQUIREMENTS INCLUDE: • Ropes for pulling or dragging require a minimum of 3:1 factor of safety between rated load and minimum braking load of the wire rope - and a 10:1 factor of safety between rope and drum diameters. • It should not be possible for the wire rope to run off the side of the drum. • The rope winding on the drum shall remain a minimum of 11/2 times the rope diameter from the outer periphery of the drum flange. • A minimum of 7 wraps of rope must be retained on the drum to secure rope anchorage. *EN 14492-1 is a legally binding EU Health & Safety requirement. This is the joint responsibility of the supplier, the installer and the company operating the product. For further information please contact the Dale's sales team.

For more information on AC1000 In-line Recovery Winches talk to Dale Lifting