F&E Water Tank - 568 Litres - GRP Feed and Expansion Tanks

Description 568 Litres Nominal Capacity GRP One Piece Insulated F&E Water Tank F&E Water Tank Manufactured to BS EN 13280, made from WRAS Approved Materials Internal Dimensions (L x W x H): 966 x 763 x 788mm External Dimensions (L x W x H): 1136 x 933 x 813mm Manufactured with GRP Resins that are designed to withstand water temperatures up to 90 Degrees C, finished with a Gelcoat internal surface to prevent bacterial growth and importantly helps to keep the water as clean and fresh as possible. The tank has Insulation encapsulated into the tank walls and Lid, as a result the external finish is cleaner. Supplied with a Flange around the top of the tank  with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects. Balance Tanks are designed to ensure that the water in the pool is kept at the correct level Swimming pool balance tanks need to be emptied and cleaned on an annual basis, whilst spa pool balance tanks requiring cleaning on a weekly basis For more information on Feed and Expansion Tanks please Click Here Litres are Nominal Capacity (to the Brim of the Tank) Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base. There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base. There is a 25mm radius at the edge of each wall of the tank and also onto base. A Usual Lead time for the tank is shown on this product, please check with us as this lead time can increase at busy times. For more size options available on our standard tank sizes please Click Here

For more information on F&E Water Tank - 568 Litres - GRP Feed and Expansion Tanks talk to Drayton Tank & Accessories Ltd