Two Piece Water Storage Tank - 910 Litre GRP Water Tank

Description 910 Litre Nominal Capacity GRP Two Piece Insulated Cold Water Storage Tank Two Piece Water Storage Tank Manufactured to BS EN 13280, made from WRAS Approved Materials Internal Dimensions (L x W x H): 1169 x 890 x 890mm External Dimensions (L x W x H): 1339 x 1060 x 915mm Horizontal Split Height: 445mm Made from Glass Reinforced Plastic with a Gelcoat internal surface to prevent bacterial growth and importantly helps to keep the water as clean and fresh as possible. The tank has a horizontal Split halfway up the height of the tank, this allows the tank to pass through narrower gaps like standard doorways and has Insulation encapsulated into the tank walls and Lid, as a result the external finish is cleaner. Supplied with a Flange around the top of the tank  with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects. Tank is WRAS Approved, Which above all other details the most important part for any drinking water tank. Wras Approval ensures the tank is suitable for use as a potable vessel.  For more information on WRAS Approvals please Click Here Litres are Nominal Capacity (to the Brim of the Tank) Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base. There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base. There is a 25mm radius at the edge of each wall of the tank and also onto base. A Usual Lead time for the tank is shown on this product, please check with us as this lead time can increase at busy times. For more size options available on our standard tank sizes please Click Here

For more information on Two Piece Water Storage Tank - 910 Litre GRP Water Tank talk to Drayton Tank & Accessories Ltd