Kewtech EV Charging Point Testing Adapter

Kewtech EV Charging Point Testing Adapter

Features

• Enables testing of EV charging points
• Works with any MFT with EV charging point testing capabilities
• No awkward cable to negotiate when testing - plugs straight into the charging unit
• Automatic single dial operation for ease of use
• Direct low resistance connections for highly accurate results
• Uses standard 4 mm connectors rated at 10 A for testing purposes
• Suitable for single & three phase charging equipment
• Supplied with durable carry case
• Smallest in class
• Red LEDs indicate live status per phase
• Single rotary dial controls the CP status simulation: standby, ready & charging
• Separate RED LED indicates when voltage is applied to output connectors
• Auto check of 1 kHz control pilot signal - no oscilloscope required
• Incorporates an IEC 62196-2 type 2 connector for EV charging units
• LED indication of Phases
• Type 2 male connector for EVSE connection

Key Features

• Input voltage: Max 250 V (single phase), Max 430 V (three phase) 50/60Hz
• Measurement category: BSEN 61010 CAT II 300V
• Current carrying: Max 10 A for intermittent testing purposes only
• CP states simulation: A, B, C
• EV charger connection type: IEC62196-2 Type 2 male
• Working temperature: 0 - 40 degree C
• Storage temperature: -10 - 50 degree C
• Humidity: 0 - 80% RH
• Product code: KEWEVA
• Manufacturer: Kewtech

For more information on Kewtech EV Charging Point Testing Adapter talk to Expert Electrical Supplies Ltd