Adiabatic coolers

Adiabatic coolersAir Blast Water Coolers, sometimes known as Dry Air Coolers are available in configurations ranging from 1.5kw through to 1000kw and are supplied as a packaged unit (box cooler) complete with tank, pumps and electrics ready for onsite connections to services or as a stand-alone cooling module with the option of adiabatic systems.Whilst dry air coolers will only cool water to within 3°C of ambient, there is a further option which allows this form of cooling to achieve water off (water leaving the system) temperatures as low as to within 5°C of wet bulb ambients. This is known as an adiabatic system, where in higher summer ambients a fine mist of water is sprayed on to the heat exchanger surface reducing the air temperature on the cooling coil. Adiabatic systems are complete with an ultraviolet light water treatment system so again no requirement for chemical water treatment but with the advantage of water temperatures being below dry bulb ambients.Applications for air blast water coolers, dry air coolers and adiabatic systems are anywhere a process requires cool clean water such as induction furnaces, hydraulic cooling, compressors, quench tanks, printing machines, vacuum pumps and many others. In some instances it will be necessary to install the dry air coolers externally although extra care should be taken to avoid frost damage during the winter.F&R Products specialise in the specification, manufacture and installation of cooling systems including dry air coolers and can advise on the most appropriate solution for your needs.

For more information on Adiabatic coolers talk to F and R Products Limited