Hose Kit for Transfer Pump

For more information about Hose Kit for Transfer Pump please contact us.

Hose Kit for Transfer Pump (3/4" or 1" inlet/outlet)NOTE: PUMP SHOWN FOR ILLUSTRATION PURPOSE ONLYAvailable with 3/4" or 1" Hose to suit pumps with 3/4" or 1" inlet/outlet.Comes complete with a single length of hose, which can be cut to suit your own specific requirements (e.g. allow say 1.6 metres for the suction and 3 metres for the delivery sides of the pump).Everything you need is included in the kit: Hose length: 4.6 Metres Available in either 3/4" or 1" ID, Cloth Reinforced Nitrile Nozzle Type: Manual Aluminium c/w brass swivel Hose Tails: 4 These are sized to fit the Hose/Pump/Nozzle/Non-return Valve Jubilee Clips: 4 Appropriately sized to fit Hose/Hose Tails Non-Return Valve: 1 The Non-return Valve and Strainer comes complete Strainer: 1 Comes integral with the Non-return Valve (500 micron) PTFE Tape: 1 Roll of PTFE tape sufficient to make all joints - 12M x 12mm x 0.075mm Products from www.fueldump.co.uk

Please contact us for further information about Hose Kit for Transfer Pump.

For more information on Hose Kit for Transfer Pump talk to Fuel Dump