Nice Robus 600 24Vdc Kit for Sliding Gates up to 600Kg

For sliding gates weighing up to 600kg Included in The Kit 1 x RB600 irreversible electromechanical gear motor with an incorporated control unit and Electromechanical limit switch. 1 x OXI receiver up to 4 channel receiver with the connector without the built-in transmitter. 1 x EPMB Pair of external photocells designed for connection by Nice BlueBUS 2 x ON2E�transmitter 433.92MHz, 2 channels. Electromechanical gear motor with Nice BlueBUS technology. Versions with Inductive limit switch (ROBUS600P). Compatible for operation with Solemyo and Opera systems. User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven pairs of photocells from the MoonBus series using two wires only. Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor. Advanced: ROBUS600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a fl ashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle. Very quiet: gear motor on bearings.

For more information on Nice Robus 600 24Vdc Kit for Sliding Gates up to 600Kg talk to Gates and Accessories