Astral Heat 3 Inverboost All Year Pool Heat Pumps 14kw - 26kw 17kw Single Phase

Heat 3 Inverboost All Year Heat Pump Range Update April 2022: We have some models in stock for immediate delivery   1. Description The Heat 3 inverter driven heat pump for all year use, comes with Fluidra Connect-compatibility. It has been specially designed to obtain good performance in harsher climates. In addition, it runs in power-saving mode to achieve better energy efficiency, makes less noise than other heat pumps and can be used all year around. Accessories included: Winter cover, anti-vibration brackets, drainage connection, screen watertight box, 10m screen connection cable, hydraulic connection fittings and Modbus signal cable.   2. Features Inverter technology, which automatically changes the power setting so that the heat pump runs at optimum efficiency levels. Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output Fluidra Connect-compatible through a Modbus connection to the Fluidra Connect platform. Capable of heating and cooling, all year round A soft starter prevents current surges when the compressor starts up. Lowest outdoor air working temperature of -20ºC, designed to work in cold climates. The reverse cycle defrosting system makes defrosting faster. Heating and cooling modes, thanks to the four-way valve. Electronic expansion valve for enhanced COP performance. R-32 refrigerant gas, free of agents that damage the ozone layer. ABS plastic housing, which prevents corrosion. Titanium exchanger with twisted tube for enhanced performance - resistant to corrosion from chlorine or salt pools. High- and low-pressure flow meter and pressure switch. Modbus-compatible. Three operating modes:- Powerful - maximum heat output, runs at 100% Smart - automatically selects between medium and maximum heat output Silent - automatically selects between minimum and medium heat output Desired water temperature can be set from +10c to +40c Touchscreen. Microprocessor controlled Automatic hot gas defrost. High efficiency with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is returned to the pool. Suitable for pools, swim spas, hot tubs and koi ponds etc Low noise, variable speed fan. Mitsubishi inverter compressor 2-Year Warranty Wifi-control can be added by the optional Fluidra Connect module Display: 3. What size heat pump do I require for my pool? The sizing guide for a covered pool is:- Model Kw Recommended Pool Volumes Heat 3 Inverboost 14kw 66m3 Heat 3 Inverboost 17kw 86m3 Heat 3 Inverboost 21kw 122m3 Heat 3 Inverboost 26kw 135m3 4. COP And Performance By using the latest inverter technology, the Heat 3 Inverboost can outperform traditional on/off type heat pumps. Even as the outside air temperature falls, the  Heat 3 Inverboost will still perform well, delivering heat to your pool. The  Heat 3 Inverboost NN heat pumps can work well with outside air temperatures as low as -20c The COP (Coefficient of Performance) is the ratio of the amount of heat (in kw) that the heat pump delivers to your pool compared to the electricity that the heat pump uses (in kw) By using the latest inverter technology, the  Heat 3 Inverboost has COPs up to 13. This means that in these conditions, 1kw of electricity consumed by the heat pump will output 13kw of heat to your pool ! 5. Extremely Quiet Operation The Heat 3 Inverboost range work very silently thanks to a unique internal ventilation system and the inverter technology. Both the fan and compressor automatically adjust their speed to match the pool heat demand, therefore once the pool is up to temperature, the unit can operate with reduced power consumption and noise. 7. Wi-Fi Control The Fluidra Connect Platform allows the Heat 3 Inverboost to be monitored and controlled from a smartphone or any internet web browser or via the Modbus connection The Fluidra Connect Platform allows you to operate lighting, and many other functions as well as your heat pump. Note: When using the optional wifi module, a wifi signal is required at the location of the heat pump in order for the wifi module to be able to connect to your wifi. Please test the strength of the wifi signal e.g. with a laptop or your smart phone before purchasing the wifi module. Please see the link to give you full information on this product on: https://www.fluidraconnect.com/en/ If you do not have a wifi signal at the heat pump's location, then you can either:- Use a wifi signal extender to boost the signal in the area of the heat pump Use power LAN adaptors plugged into mains sockets in the house and the pool shed. You can then connect a wifi extended to the powerlan adaptor in your pool shed. Please Contact Us if you need assistance with the wifi configuration 8. Specifications Please Specifications tab at the top of the page 9. Accessories included Accessories included: Winter cover, anti-vibration brackets, drainage connection, screen watertight box, 10m screen connection cable, hydraulic connection fittings and Modbus signal cable. Winter cover (lightweight) Anti-vibration mounting feet (x4) Drainage connection Screen watertight box 10m screen connection cable Hydraulic connection fittings Modbus signal cable 10. Optional Extras: Heavy Duty Mounting Feet These heat pumps come with rubber  mounting feet (see photo above). Alternatively you can purchase these heavy duty Mounting Feet. These raise the unit off the ground by approximately 100mm, and also help to reduce vibration. Please see our Mounting Feet and Slabs section for more information. Bypass Kit Please see our Bypass Kits section section for more information. Winter Cover The unit comes with a lightweight winter cover, however we offer a heavy duty cover which will give you added and extended protection against the winter weather Please see our Winter Cover section section for more information. 11. Installation Installation is straightforward. We can provide advice on installing your heat pump. We can also offer an installation service if required. We recommend that a bypass is installed to allow the heat pump to be drained in winter if not in use. We sell bypass kits if required. Please see our  Installation Tips  pages for information on how to install your heat pump. Our Photo Gallery also has photograph examples of pool heat pump installations and please also see the  FAQ  pages for more information The Heat 3 Inverboost heat pumps can also be installed on hot tubs and swim spas. Please contact us for further advice 13. Availability The range of Heat 3 Inverboost pool heat pumps are now in stock in the UK and can be shipped to any UK address on a 1 - 3 day delivery service. 14. Delivery The price includes FREE UK delivery. We can ship the  Heat 3 Inverboost heat pumps to any country . Please contact us for a shipping quote. 15. Warranty The  Heat 3 Inverboost heat pumps come with a 2-year warranty on all components:- We recommend that you retain the pallet and packaging that the heat pump was delivered with in case you need to return the unit to us for repairs under the warranty.  The warranty will not apply where the heat pump has been installed incorrectly, or has been damaged by freezing 16. Technical Support We are happy to provide technical support for all  Heat 3 Inverboost swimming pool heat pumps that we supply. 17. Product Literature Please see the Literature tab at the top of the page for the Brochure and User Manual downloads. 18. Assistance? If you need any assistance or advice as to which model would be best for your pool, please email us for more information, also see our FAQs page All items sold in accordance with our terms and conditions For all enquiries, please contact us at enquiries@heatpumps4pools.com

For more information on Astral Heat 3 Inverboost All Year Pool Heat Pumps 14kw - 26kw 17kw Single Phase talk to HeatPumps4Pools Ltd