Kit 3 Above Ground Swimming Pool Connection Kit

Kit 3 Above Ground Swimming Pool Connection Kit   When installing an above ground pool, you may find it confusing to attach all the different hoses as each pool/pump and filter and heat pump comes with different connections. At Heatpumps4Pools Ltd we have tried to make this task as easy as possible but there are a few different factors to take into account. The basic layout should look like the picture below: We have labelled the 6 connection points so that we can advise where the pieces of the Kit is to be positioned 1-6. Please see below for this information 1. Description This kit is ideal for the use with a an above ground pool that has 32mm connections When a 38mm Intex Krystal Clear Sand Filter with the following Heat Pumps: SunSpring 2. This Kit includes the following: 2 x Adaptor B (Connections 1 and 6) 1 x Adaptor A (Connection 3) 1 x 38mm Hose (Use between the Pump and Filter and the Heat Pump - Connections 3 to 4) 2 x  Jubilee Clips (Use at each end of the 38mm Hose - Connections 3 to 4) 1 x 2" to 1.5" Reducing Nipple (Connection 5) 2 x Adaptor B (Connections 1 and 6) 1 x 2" to 1.5" Reducing Nipple (Connection 5) 1 x Adaptor A (Connection 3) 2 x  Jubilee Clips (Use at each end of the 38mm Hose - Connections 3 & 4) For our full sizing guide please click on the following link Above Ground Pipe Connection Guide If this kit is not available for any reason then you can also use Kit 2. 3. Fitting Guide The 2 x B Adaptor's can be placed on the 32mm pool connections - this will convert the pool inlet/outlet connections to the 38mm. (Connections 1 and 6) The 1 x 2" to 1.5" Reducing Nipple is to be screwed in to the SunSpring heat pump outlet (narrow end) allowing you to screw the grey nuts from the Intex hose directly on to the reducing Nipple (wider end). (Connections 5) *Please note: The Krystal Clear pump and filter set is supplied with 2 x 38mm Intex Hoses - attach both of these two hoses to the adaptor B's that are both now attached to the pool inlet/outlet (as on point 1). The other end of these 2 hoses are to positioned as follows: the first of these hoses (from the outlet of the pool) is screwed directly on to the Inlet of the Krystal Clear Pump and Filter (Connection 2) , the other will be screwed on to the Reducing Nipple which is now positioned in the outlet of the heat pump (as per point 2 above) - (Connection 5) The 1 x A Adaptor can be placed on the Outlet of the Krystal Clear pump/filter - (Connection 3) Place both Jubilee Clips on to the Hose. The 38mm Hose is then to be positioned on to the Adaptor A hosetail on the outlet of the Krystal Clear pump/filter and the other end is to be pushed on the hosetail supplied with the SunSpring Heat pump. (Connections 3 to 4) The 2 Jubilee Clips are to be tightened on the outside of the Hose accordingly to secure the hose (Connections 3 to 4) NOTE: The hose supplied can be Blue or White depending on the stock levels 4. Availability We try to hold a large amount of stock of these kits in the UK which can be shipped to any UK address on a 1 – 3 day delivery service. However sometimes in very busy periods there may be a delay from suppliers on some of the parts needed for these kits - so we will update the website when this  situation occurs. 5. Delivery Shipping for order under £50 is £6.50 We can ship the The Above Ground Pipe Connection Kits to any country . Please contact us for a shipping quote. 6. Assistance? If you need any assistance or advice as to which model would be best for your pool, please email us for more information, also see our FAQs page All items sold in accordance with our terms and conditions For all enquiries, please contact us at enquiries@heatpumps4pools.com

For more information on Kit 3 Above Ground Swimming Pool Connection Kit talk to HeatPumps4Pools Ltd