Kit 4 Above Ground Swimming Pool Connection Kit

Kit 4 Above Ground Swimming Pool Connection Kit    When installing an above ground pool, you may find it confusing to attach all the different hoses as each pool/pump and filter and heat pump comes with different connections. At Heatpumps4Pools Ltd we have tried to make this task as easy as possible but there are a few different factors to take into account. The basic layout should look like the picture below: We have labelled the 6 connection points so that we can advise where the pieces of the Kit is to be positioned 1-6. Please see below for this information 1. Description This kit is ideal for the use with a an above ground pool that has 32mm connections When a 38mm Intex Krystal Clear Sand Filter with the following Heat Pumps: Q-Line 2. This Kit includes the following: 4 x Adaptor B (Connections 1,4,5 and 6) 1 x 38mm Intex Hose (Use between the Pump and Filter and the Heat Pump - Connections 3 to 4)     4 x Adaptor B (Connections 1,4,5 and 6) 1m x 38mm Intex Hose with screw on Nuts (Use between the Pump and Filter and the Heat Pump - Connections 3 to 4) For our full sizing guide please click on the following link Above Ground Pipe Connection Guide If this kit is not available for any reason then you can also use Kit 5. 3. Fitting Guide The 4 x B Adaptor's can be placed on the 2 x 32mm pool connections and also the other 2 x Q-Line connections - this will convert the pool and heat pump inlet/outlet connections to the 38mm that is required by the 3 hoses (*As below), then the hoses just screw on to the Adaptors together using the hoses making this a really easy solution. (Connections 1,4,5 and 6) *Please note: The Krystal Clear pump and filter set is supplied with 2 x Intex Hoses (with the grey nuts, also 38mm - attach both of these two hoses to the adaptor B's that are both now attached to the pool inlet/outlet). The hose from the outlet of the pool is to be screwed directly on to the Krystal Clear Pump and Filter and the other Hose attached to the pool is to be screwed on to the Adaptor B which is attached to the Q-Line Heat pump on the water out (Outlet) *The 3rd 38mm Intex Hose is to be positioned on to the Krystal Clear pump/filter outlet and the other end is to be screwed on to the adaptor B which is placed on the Q-Line Heat pump Inlet . (Connections 3 to 4) 4. Availability We try to hold a large amount of stock of these kits in the UK which can be shipped to any UK address on a 1 – 3 day delivery service. However sometimes in very busy periods there may be a delay from suppliers on some of the parts needed for these kits - so we will update the website when this  situation occurs. 5. Delivery Shipping for order under £50 is £6.50 We can ship the The Above Ground Pipe Connection Kits to any country . Please contact us for a shipping quote. 6. Assistance? If you need any assistance or advice as to which model would be best for your pool, please email us for more information, also see our FAQs page All items sold in accordance with our terms and conditions For all enquiries, please contact us at enquiries@heatpumps4pools.com

For more information on Kit 4 Above Ground Swimming Pool Connection Kit talk to HeatPumps4Pools Ltd