General Specification

EnvironmentalWorking Temperature0 to +60 deg CFunctional Temperature-25 to +70 deg CStorage Temperature-40 to 85 deg CTemperature Coefficient0.02% per deg (200 ppm/C)Relative Humidity95% non condensingClass of ClimateHSE complying with DIN 40040-3 complying with VDE/VDI 3540Relay outputRelay Typedual pole change overMaterialSilver / CandiumContact Resistance200mOhm max typically < 50mOhmRating AC:250V 10ARating DC150V 10AElectrical Life1 x 105 at above loadMechanical Life5 x 106Operating time approx7mS (20mS max)Dielectric strengthBetween coil and contacts5kV RMS 1minBetween Adjacent contacts1kV RMS 1minInsulation resistance1000M Ohm at 500V DCOperating temperature-30 to +75 deg CApproval UL and CSA recognisedInsulationTest Voltage4kV RMS 50Hz 1 min between Input/Case/AuxiliaryImpulse TestEMC 5kV transient complying with IEC 801 /EN55020HF interference testEHF 2.5kV 1MHz complying with IEC 255-4Protection ClassII complying with IEV 348Applied StandardsGeneralIEC 144 / BS 5420 / VDE / VDI0435 / IEC 947/ EN6094Safety IEC 348 / BS4753 DIN 57411 / VDE 0411ANSI C37Surge withstandIEC 801 / EN 55020 ANSI C37-90ARadio ScreeningRFI degree N complies with VDE 0875VDE 0875Enclosures & ApprovalsFixingSnap on to DIN rail 35mm x 7.5mm complies withDIN-EN 50022 BS5584MountingAny positionEnclosure codeCase IP 50 / terminals IP 30. Complies withIEC 529 BS5490 DIN 40050U.L.ApprovalFile No E157034Case Dimensions

For more information on General Specification talk to Howard Butler Ltd