General Specifications

EnvironmentalWorking Temperature0 to +60CFunctional Temperature-25 to +70CStorage Temperature-55 to +85CTemperature Coefficient0.02% per deg C (100ppm / C)Relative Humidity95% non-condensingClass of ClimateHSE complying with DIN 40040-3complying with VDE/VDI 3540InsulationTest Voltage4kV RMS 50Hz 1min. between Input/Case/AuxiliaryImpulse TestEMC 5kV transient complying with IEC801 /EN55020HF Interference TestEHF 2.5kV 1MHz complying with IEC 255-4Protection ClassII complying with IEC 348, BS4753 / DIN57411 / VDE 0411Applied StandardsGeneralIEC 688 / BS6253 / VDE / VDI2192SafetyBSEN61010 DIN 57411 / VDE 04111Surge WithstandIEC801 / EN55020 ANSI C37-90ARadio ScreeningRFI degree N complies with VDE 0875AccuracyClass± 0.2%complying with IEC 688Calibration temperature23cTemperature Co-efficient0.01% / C (100 ppm / C)Stability0.05% per annum non cumalative.Warm up time< 15 minOutputRated ValueSee individual product pagesLoad Resistance mA (Unless otherwise stated)1mA < 15 kOhm5mA < 3 kOhm10mA < 1.5 kOhm.20mA < 0.75 kOhm4-20mA < 0.75 kOhmLoad Resistance Volts (M100-VA1,VA3 only)1, 5& 10 volts > 50 kOhmLoad Influence< 0.1%Ripple< 0.5% peak-peak at full loadResponse time<200 msec for 0-99 at full loadOverload< 2 x rated value at full loadNo load voltage< 27VEnclosureFixingSnap on to DIN rail 35 x 7.5mm complies with DIN-EN 50022 BS 5584MountingAny positionEnclosure CodeCase IP 50 \ Terminals IP 30 Complies with IEC 529 BS 5490 DIN 40050

For more information on General Specifications talk to Howard Butler Ltd