Add My Company
Sign In
Audio Technica ATW-1101/L Digital 2.4GHz Wireless LAPEL Microphone System (Licence Free)
Product Code: 966
In Stock - Licence Free Audio-Technica System 10 - Beltpack Digital Wireless LAPEL Microphone System - designed to provide performing musicians and presenters with advanced 24-bit operation. Easy setup and clear, natural sound quality.
Licence Free - Up to 8 Systems can be used togetherAT-829cW Lapel microphone included with Tie Clip and Foam Windshield
Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
Featuring stackable, contemporary styling, System 10 is available in multiple system configurations.
The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.
The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- 2.4 GHz range – completely free from TV interference
- Three levels of diversity assurance: frequency, time, & space
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and set-up
- State-of-the-art digital receiver for reliable performance
- Balanced XLR and unbalanced 1/4” output jacks with level control
- Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Range: 30 m (100') typical Open range environment with no interfering signals
- Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
- Frequency Response: 20 Hz to 20 kHz Depending on microphone type
RECEIVER SPECIFICATIONS
- Receiving System: Diversity (frequency/time/space)
- Output Connections: XLR, balanced and 1/4" (6.3 mm) Jack unbalanced
- Universal Power Supply Included: AV to 12V DC
- Dimensions: (WxHxD) 190 x 47 x 129 mm
- Weight: 290g
BODY-PACK TRANSMITTER
- Rf Power Output High:10 mW
- Spurious Emissions:Following federal and national regulations
- Input Connections: Four-pin Locking Connector
- Pin 1: GND, Pin 2: INST INPUT,
- Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
- Batteries: 2 x AA 1.5V (not included)
- Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
- Dimensions: 70 x 107 x 25 mm
- Net Weight: 100g without batteries
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 70-16,000 Hz
- Open Circuit Sensitivity: -42.8 dBV (7.3mV) re 1V at 1 Pa
- Signal to Noise Ratio: 67.1 dBA, 1 kHz at 1 Pa
- Weight: 2.4g
- Dimensions: 24mm long, 10.5mm diameter
- Cable: 1.4 m long (permanently attached to microphone), terminated with HRS connector
- Includes: 1 x AT8131 foam windscreen; 1 x AT8434 clothing clip;
For more information on Audio Technica ATW-1101/L Digital 2.4GHz Wireless LAPEL Microphone System (Licence Free) talk to Ipswich PA
Enquire Now
More products
List your company on FindTheNeedle.