Add My Company
The NP-400 can peel insulation from a conductor with an O.D. of 10 to 32mm and a maximum insulation thickness of 3mm. This tool will not work on semiconductors since the cutting blade is used uses a scoop design to pull insulation away from the wire strands. It is most commonly used on jacketed aluminium and copper cables for both underground and overhead. The NP-400 can handle mid-span peelining as well as cable end preparation. A simple rotation and hand force is all it takes to remove the jacket.
It is necessary to change the blade depth according to the insulation thickness Operating instructions: 1 Set the blade depth by rotating the adjusting knob 2 Set the conductor in the peeler 3 Start peeling by rotating the peeler around the conductor 4 Apply hand force against the peeling direction to end the peeling.
For more information on NP-400 For Electrical Contractors, please call us on 01388 777132.
For more information on NP-400 For Electrical Contractors talk to Izumi Products UK Ltd