Fadini Divo 71 4 button 433 MHz gate automation transmitter

Replaces the Fadini Astro 43/2 Piccalo and the Fadini Jubi 433 small.4 button = 4 channelsRolling codeSelf-learning433 MHz frequencyUp to 120m rangeUp to 2 years battery life from 3V CR2032 batteryDimensions = 75 x 45 x 11mm Available in 4 coloursMustard yellowLime greenLilac candySkyline grey REPLACING AN ASTRO 43 TRANSMITTER WITH A DIVO 71 TRANSMITTERTo check that the DIVO 71 is set to the ASTRO43 range holddown buttons 3 & 4. If the LED flashes once then it is on the correct range. If it flashes3 times continue with the below instructions SETTING THE DIVO 71 TO THE ASTRO 43 RANGETo code the DIVO 71 to be compatible with the ASTRO 43press buttons 1 & 4 together for 5 seconds. The LED should flash once. If it flashes 3 timesrepeat the operation until it flashes once. The Divo 71 is now really to code. DUPLICATING A DIVO 71 FROM A CODED ASTRO 43Press and hold button 1 and then press button 2 twice.Keep button 1 pressed until the LED flashes 3 times (approx 5 seconds).The LED will then stay onsolid.Place the pre coded ASTRO 43 next to the DIVO 71 and pressand hold any button on the ASTRO 43 until the Divo led flashes 3 times ( approx 5seconds).Carry out the same operation for any additional DIVO 71. CODING A DIVO 71 DIRECTLY ONTO AN ASTRO 43 RECEIVER CARDEnsure all dip switches on the ASTRO 43 receiver are inthe off position (down).Power the ASTRO 43 receiver.Put dip switches 1 & 5 on.Hold down the button on the DIVO 71 that you want to useto open the gate until the receiver LED flashes on and off.Repeat the task for any additional DIVO 71.Put dip switches 1 & 5 back to the off position. Theled will flash 5 times to confirm programming is completed.

Please contact us for further information about Fadini Divo 71 4 button 433 MHz gate automation transmitter.

For more information on Fadini Divo 71 4 button 433 MHz gate automation transmitter talk to Linkcare Gate Automation