Nice ROBUS400-KIT 400 24Vdc kit for a sliding gate up to 400Kg

For sliding gates weighing up to 400kgThe Kit Contains:1 x RB400 irreversible electromechanical gear motor with an incorporated control unit and inductive limit switch. 1 x OXI receiver up to 4 channel receiver with the connector without the built-in transmitter. 1 x EPMB Pair of external photocells designed for connection by Nice BlueBUS.1 x EKS Key switch1 x ELDC Flashing light2 x ON2E transmitter 433.92MHz, 2 channels. user-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only. Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus. Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels. safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. sturdy: base and release in pressure die-cast aluminium and epoxy paint finish. Very quiet: gear motor on bearings.

Please contact us for further information about Nice ROBUS400-KIT 400 24Vdc kit for a sliding gate up to 400Kg.

For more information on Nice ROBUS400-KIT 400 24Vdc kit for a sliding gate up to 400Kg talk to Linkcare Gate Automation