IBC Heating Jacket

IBC / Tote Flexible Heating Jackets for safe and hazardous areas - Wide range of IBC heating jackets, insulation-only and PVC covers for plastic liner metal framed 1000L “Schutz” style IBCs from stock. - Safe area and hazardous area ATEX / IECEx certified products. - Gentle warming and anti-freeze through to heavy-duty aggressive and fast heating. - Indoor and outdoor / wet environment options. - Multiple control and sensor setups. - Custom non-standard / large process tank solutions also available. Safe Area Applications Tried and tested the World over, our Flexible Heating Jackets simply wrap around the tank, clip together and the thermostat can be set to the desired temperature. - High-grade stich-bonded fiberglass thermal insulation to reduce heat-loss and increase efficiency whilst providing protection for the operator - Fitted with adjustable retaining straps and quick release buckle clips - Tough nylon outer layer, high temperature silicone-impregnated glass cloth inner - Integrated fully adjustable analogue and digital temperature controllers, with options for additional temperature monitoring probes - 230/240volt and 110/120volt versions available from stock - Deliver an even heat over a large surface area, minimising the possibility of spoiling the product - Fit and forget – no regular maintenance required, safe to use 24 hours a day - Rated IP54 as standard, double insulated, and supplied with armoured cable Single-circuit 1400W ‘IBC1’ model £ For gentle warming, reducing viscosity, and anti-freeze £ Supplied as standard with a -5 to +40°C integrated thermostat £ Cost effective solution when faster heating times are not required £ Insulated IBC lids also available to reduce heat-loss Dual-circuit 2800W ‘IBC2’ model £ Ideal for customers requiring liquids to be heated rapidly and as evenly as possible £ Two high power heating circuits enable the top and bottom of each jacket to be separately controlled £ Constructed in HiHeat style with thick insulation and 0-90°C thermostats Triple-circuit 3990W ‘IBC3’ model £ For maximum power and top temperatures £ Three high power heating circuits enable the top, middle and bottom of each jacket to be separately controlled £ Supplied together with an IBC insulated lid (including top access flap) as standard Selection of the correct equipment is dependent on many factors including material type, environmental conditions, required operating temperature and desired heating rates. Potentially Explosive Hazardous Area Applications Reputation isn’t gained overnight. For more than 35 years LMK Thermosafe has been providing hazardous area solutions for the harshest of environments. With a proven track-record for reliability and safety, our Inteliheat Flexiplus range of hazardous area heating jackets are independently certified as complete systems. Don’t compromise safety with “piece-part approvals”. Suitable for both gas and dust ATEX / IECEx zoned areas (1, 2, 21 and 22), with different temperature classification solutions available. As with our safe area range of IBC heating jackets, we have a number of standard ex-stock options for heating plastic liner metal framed IBCs, and we can also provide customised solutions for other IBCs and large tanks. Selecting the right model will depend on a number of factors including (but not limited to) the following: - Required temperature of IBC contents - IBC size and type - Desired heating rate - ATEX / IECEx zone temperature classification - Operating ambient temperature range - Environment – indoors or outdoors, and necessary ingress protection rating - Heating process type, and onward processing steps - Available power supply The Intliheat Flexiplus range offers two types of solution – one where the jacket self-limits at a fixed temperature above ambient, and the other where the heater is supplied with a jacket-mounted or wall/stand- mounted temperature regulator or digital temperature controller. We also manufacture hazardous area heating jackets with North American UL/CSA standard certifications for both C1D2 and C1Z1 zoned areas, and of course have solutions for smaller vessels, drums and cylinders. T: +44 (0)1440 707141 E: sales@drumheating.com

For more information on IBC Heating Jacket talk to LMK Thermosafe Ltd