Goods Lift Manchester

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 700mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels it will be the responsibility of the main contractor to install fire doors as required, with a vision panel. We will then fit these doors with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level the existing floor should be cut out, down to the concrete to allow us a solid fixing, the platform will then dock flush with the floor level. A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels. Goods Lift supplied CE Marked with Declaration of Conformity. Operation and Maintenance Manual issue on completion. LOLER Report of Thorough Examination and Test issued on commission. Operator training carried out on completion. Service Contract 12 months Statutory Inspections and maintenance ensures continued safe and reliable use of the equipment and full compliance with current legislation. In brief it comprises an annual service with thorough examination and test, a six-month inspection and test and all labour or callout charges Installed, The Dockyard, B3/4, Left Bank, Irwell Square, Spinningfields, Manchester, M3 3AN For a quotation please contact; Manual Handling Solutions 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website/

For more information on Goods Lift Manchester talk to Manual Handling Solutions, Goods Lifts