Mezzanine Floor Lifter Stansted UK Goods Lift

Design, manufacture and install 1 off mast-type goods lift to be installed between 2 fixed levels inside a building •The lift will be constructed using a single mast which must be tied into the mezzanine floor structure, within a shallow pit. •The lift platform will measure approximately 1430mm wide by 1410mm deep and will close down over the legs of the masts •The clear working platform area will be 1350mm x 1350mm •The overall plan size of the lift including enclosure will be approx 1830mm deep x 1910mm wide •The platform will feature 1100mm high rails on 4 sides with a single outwards opening gate in front of the mast (Side B). The gate will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open. •The platform will close to the floor with a 60mm lowered height and have a maximum total raised height of 4300mm •The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor. •The platform will NOT be supplied with a loading ramp •The lift will be supplied with a bridging plate to be installed on the mezzanine level •The hydraulic power pack will be mounted to the mast and electrical system will be housed in a separate enclosure mounted box at ground level. •Control points will be positioned at both ground and upper floor levels. Both points will feature latching call buttons and emergency stop controls. •Power requirement: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer) •Motor specification: 0.75Kw 3phase 415V with 4ltr reservoir •Maximum lift capacity will be 500Kg • Manufacture and install 1 off External guard system for both upper and lower floors •The lift will be supplied with a full height enclosure on all sides, measuring approximately 1830mm deep, 1910mm wide and 6900mm high overall. The enclosure will feature single gates on side B at both levels; 2200mm high on the ground floor and 1100mm high on the first floor. All gates will be fitted with an electrical/mechanical interlock to prevent opening when the lift is not parked. Installation of the lift at Bishop Stortford Fisher BioServicesUK Woodside Bishops Stortford Herts CM23 5RG Manual Handling Solutions www.manualhandlingsolutions.co.uk bespoke custom designed materials handling and lifting equipment. We provide some of the most advanced handling equipment available from standard products to a bespoke solution. Our range of lifting equipment and materials handling products are by far the most sophisticated and technically advanced and manufactured to the highest standard. As a Handling Solutions provider our goal is to work closely with our customers and bring the most technically advanced handling products - solutions to market. Our product range includes; Goods Lifts, Mezzanine Floor Lift, Mezz Goods Lifts, Platform Lifts, Bay Lifts, Loading Bay Lifts, Split Level Goods Lifts, Passenger Lifts, Attended Goods Lifts, Bespoke Handling Stainless Steel, Drum Handling and Cylinder Handling Equipment. Bin Tippers, Basement Lifts, DDA Access Platforms, Scissor Tables, Static Scissor Lift Tables, Bespoke custom designed Scissor Tables, Form Filler Tube Lifters, Stainless Steel fabrication, EZ Loader, Low Level Platform Lifts, Car Lifts, Lightwell Lift, Basement Goods Lifts, Access Lifts, Pallet Lift, Warehouse Goods Lifts, Hospital Bed Lifts, Wheelie Bin Lifts and Tippers, Mobile Scissor Tables. Require a Lift then call For a quotation please contact us at the following; Manual Handling Solutions 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ UK Tel 01553 811977 sales@manualhandlingsolutions.co.uk www.manualhandlingsolutions.co.uk http://goodslift.website/mezzanine-floor-lift-goods-lift-installed-in-bishops-stortford/

For more information on Mezzanine Floor Lifter Stansted UK Goods Lift talk to Manual Handling Solutions, Goods Lifts