Mezzanine Goods Lift Corby

Mezzanine Floor Goods Lifts Corby Northamptonshire. When you need to move large, bulky or heavy loads, a goods lift from Manual Handling Solutions can be the right solution. A Goods Lift forms an essential part of many warehouses, factories, distribution centres and retail units, distributing goods quickly and efficiently. Project overview; Single mast 4 stop hydraulic Goods Lift 500kg installed Corby Northamptonshire FFL 10 metres. Goods Lift has a platform size is 1500mm x 1500mm fitted with 1100mm handrails on the non-loading sides x 3, twin platform gates allow for same side loading / unloading these are fully interlocked with the external doors. The self-supporting lift structure is manufactured from 100mm x 100mm box section steel with clad infilled panels. Goods lift fitted with 2000mm high double loading doors cladded with Perspex viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2290mm. Goods lift fitted with safety shoot bolts which allow for the operator to enter the lift platform safely while the lift is docked at any of the level, the shoot bolts also eliminates any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at each level fitted as standard. At the lower level entrances the lift is accessed by loading ramps 1580mm wide a 1250mm long x 120mm high. To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 3Kw control voltage 24 volt IP55.

For more information on Mezzanine Goods Lift Corby talk to Manual Handling Solutions, Goods Lifts