Sign In
Slough Goods Lifts
22-03-2022
Slough Goods Lifts
1000kg hydraulic 2 stop single column Goods only Lift installed 415 Perth Avenue, Slough Berkshire SL1 4TQ with a finished floor level 3800mm and platform size 1500mm x 1500mm fitted with 1100mm high infilled panels on the non-loading sides and 1100mm high twin opening interlocked gates finished in Red RAL 3020. To assist loading at the lower level the lift is supplied with loading ramp H120mm x W1660mm x L1250mm finished Traffic Red RAL 3020
Slough goods lift is a freestanding self-supporting lift structure manufactured from 120mm x 120mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2500mm high double loading gates cladded with Perspex viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper-level structure is 2790mm.
Goods lift fitted with safety shoot bolts which allow for the operator to enter the lift platform safely while the lift is docked at the upper level, the shoot bolts eliminate any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at all levels fitted as standard.
To prevent damage from pallet trucks and forklift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 5.5Kw control voltage 24-volt IP55.
General Specification
• Emergency lowering system when power is cut off.
• Prewired control box included magnetic starter and overload fuse.
• Upper-level travel limit switch and overload relief valve
• Hydraulic cylinders feature emergency velocity fuse if line breaks.
• Control points are fitted to both ground and upper floor levels.
• The hydraulic power pack and electrical system housed separately at ground level.
• The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor.
• Lift loaded and unloaded with hand pallet truck.
• CE plated and built-in compliance with the Machinery Directive 2006/42/EC
Installation; 415 Perth Avenue, Slough Berkshire SL1 4TQ
For a quotation please contact;
Manual Handling Solutions
Tel 01553 811977
sales@manualhandlingsolutions.co.uk
http://www.manualhandlingsolutions.co.uk
http://goodslift.website
http://goodslifts.website
http://goods-lifts.com
http://www.goodslift.co.uk
#goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanines #selfstorage #slough #mezzaninefloorsslough
Goods Lifts covering; Maidenhead, Windsor, Datchet, Holyport, Egham, Sunningdale, Bracknell, Ascot, Bagshot
For more information on Slough Goods Lifts talk to Manual Handling Solutions, Goods Lifts
Enquire Now
List your company on FindTheNeedle.