Vertical Platform Lift Bolton Manchester

Passenger / DDA MHS5000 Vertical Platform Lift – Bolton – Manchester MHS5000 Vertical Platform Lift in accordance with the specification; Passenger / DDA MHS5000 Vertical Platform Lift – Bolton - Manchester To supply, deliver, offload and install on a site properly prepared by others: MHS5000 Vertical Platform Lift in accordance with the specification • 12 months warranty including 1 service visit in 1st year • Shaft roof with automatic lighting • Platform sizes 1100 mm wide x 1500 mm long • Steel fully glazed landing standard white RAL 9016 finish doors • Landing doors with integrated self-closers • Voice Announcement • One touch landing call buttons • 415v 3 Phase electrics with direct start • Telephone on carriage connected by others SUMMARY SPECIFICATION 1. GENERAL DATA • Model MHS5000 Vertical Platform Lift • Rated Load 400 kg (500 kg uprated capacity available at additional cost) • Rated Speed 0.15 m/s with direct start • Drive System Screw and rotating nut driven by 2.2 kW AC motor. • Floors served 2 • Travel 3 metres • Configuration Single Entry • Environment Internal 2. SPACE REQUIREMENTS • Floor Area 1550 x 1650 (width x depth) mm Pit Depth 50 mm • Headroom 2300 mm minimum above top floor served 3. PLATFORM • Platform Size1100 x 1500 mm (wide x long). • Carriage1100mm high vertical facia with control panel to one long side. • Finish The platform carriage is powder coat finished in metallic silver RAL 9006. • Handrail Smooth moulded anodised aluminium handrail fitted to console. • Control panel Floor, alarm and emergency stop buttons. • Operation Constant pressure control from carriage. • Push buttons large easy to use tactile push buttons with LED illumination. • Communication Telephone on carriage connected by others. • Alarm Button on control panel for battery supported alarm at lower floor. • Overload - Overload protection with visual and audible indication. • Lighting Push buttons on the control panel are illuminated with battery backup. • Flooring Vinyl non-slip flooring – Nearly Black. • Safety Edge Fitted around sides of platform and above the carriage 4. SHAFT ENCLOSURE • Construction Insulated steel faced modules assembled on site to give a totally flush and smooth surface to both sides. A complete readymade steel shaft finished in white colour RAL 9016 (inside/outside). Solid and smooth finish shield wall provided. Shaft panels not provided to machine side • Lighting Shaft ceiling with automatic light. 5. LANDING ENTRANCES • Landing Doors Type A20 - Steel fully glazed landing doors • Full height landing doors provided at all levels. • Manual opening single swing doors with integrated self-closers. • Finishes Door and frame - standard white RAL 9016 finish • Fire Rating None • Opening Size 900 mm wide x 2000 mm high • Operation One touch control from landings. • Push buttons large easy to use tactile push buttons with red/green halo illumination. • Audible indication Voice announcer to inform of lift arrival 6. ELECTRICAL DETAILS AND POWER REQUIREMENTS • Power Supply 415 V, 3 Phase, 50Hz, 20A lockable isolator with direct start • Location Permanent 20A rotary lockable isolator externally positioned min. 2100mm high within 500mm of electrical cabinet - integral with door frame at bottom floor • Motor 2.2kw • Emergency lowering Manual hand-winding device Installed AirVault Trampoline Park Unit A 1002, Westhoughton Industrial Estate Bolton Greater Manchester BL5 3XU For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website/

For more information on Vertical Platform Lift Bolton Manchester talk to Manual Handling Solutions, Goods Lifts